Garrett GT 2560R, Tial 38 mm wastegate, COPS etc
Thread Starter
Junior Member
iTrader: (6)
Joined: Oct 2005
Posts: 335
Total Cats: 3
From: Atlanta GA
Garrett GT 2560R, Tial 38 mm wastegate, COPS etc
Locost is looking for an upgrade and current setup is available for sale.
These have been used for few thousand race miles and are in good shape, unlike the stock engine.
Garrett GT 2560 R Ball bearing turbo, internal wastegate welded shut and holes for bolts holding it to manifold enlargened to accept 10mm bolt. Great spooling turbo, dynoed 265 hp on the wheels at DIY dyno from stock motor at 14 psi at the intake. Tial 38 mm wastegate works as it should. Sold as a package for $675, shipped in lower 48 states.
Toyota Coil on Plugs with pigtails, used to dyno numbers above.
Sold!
1996 head with exhaust cam in intake side, no cam sprockets, again, used to dyno the number above $200 + actual shipping.
Stock 2001 coils with pigtails, $50 shipped
Stock 2001 exhaust manifold $50 shipped
4.1 torsen $550. I'd rather not ship this one because of the weight.
1999 intake with VICS, $100 shipped, look for other 1999 parts like head later here once plans solidify a bit.
hrk
These have been used for few thousand race miles and are in good shape, unlike the stock engine.
Garrett GT 2560 R Ball bearing turbo, internal wastegate welded shut and holes for bolts holding it to manifold enlargened to accept 10mm bolt. Great spooling turbo, dynoed 265 hp on the wheels at DIY dyno from stock motor at 14 psi at the intake. Tial 38 mm wastegate works as it should. Sold as a package for $675, shipped in lower 48 states.
Toyota Coil on Plugs with pigtails, used to dyno numbers above.
Sold!
1996 head with exhaust cam in intake side, no cam sprockets, again, used to dyno the number above $200 + actual shipping.
Stock 2001 coils with pigtails, $50 shipped
Stock 2001 exhaust manifold $50 shipped
4.1 torsen $550. I'd rather not ship this one because of the weight.
1999 intake with VICS, $100 shipped, look for other 1999 parts like head later here once plans solidify a bit.
hrk
Last edited by hrk; Dec 9, 2012 at 12:33 PM.
Reply
0
0
Thread Starter
Junior Member
iTrader: (6)
Joined: Oct 2005
Posts: 335
Total Cats: 3
From: Atlanta GA
The compressor has GARRET A/R 60 M24 1-1 on the casting.
The bearing housing has
HJ 01 06J
14411-69F00
466541-1
Turbine housing has Garret 2
turbine inled flange is 72 mm x 45 mm with holes for 10 mm studs. T25.
The bearing housing has
HJ 01 06J
14411-69F00
466541-1
Turbine housing has Garret 2
turbine inled flange is 72 mm x 45 mm with holes for 10 mm studs. T25.
Reply
0
0
Thread Starter
Junior Member
iTrader: (6)
Joined: Oct 2005
Posts: 335
Total Cats: 3
From: Atlanta GA
Photos from the turbo and wastegate.
HeikkiCMC7 Photos by HeikkiCar | Photobucket
The cone from 2" turbo outlet to 3" exhaust will come with the turbo.
HeikkiCMC7 Photos by HeikkiCar | Photobucket
The cone from 2" turbo outlet to 3" exhaust will come with the turbo.
Reply
0
0
