gospeed81 EPIC part-out
#65
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Deal pending on turbo kit.
Had lots of interst past few days...and get this, one of them is a local guy that wants to trade me a new AK-47 (Atlantic Arms) for it!
I'm sure that would go over well with the wifey.
Had lots of interst past few days...and get this, one of them is a local guy that wants to trade me a new AK-47 (Atlantic Arms) for it!
I'm sure that would go over well with the wifey.
#67
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Wife said no...
Turbo kit SOLD!
Wheels, radiator, frame rails, rebuild parts/motors, delrin diff mounts, Bosch BOV with flanges, and eBay intercooler setup are still available. Most of this smaller stuff I'll let go for shipping, packing and a $20 spot on top.
EDIT: Some prices lowered.
Turbo kit SOLD!
Wheels, radiator, frame rails, rebuild parts/motors, delrin diff mounts, Bosch BOV with flanges, and eBay intercooler setup are still available. Most of this smaller stuff I'll let go for shipping, packing and a $20 spot on top.
EDIT: Some prices lowered.
Last edited by gospeed81; 04-28-2010 at 10:57 AM.
#68
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
bump
Still lots of parts available.
Anyone willing to send money today or tomorrow before I put in a paypal deposit will get a good deal.
Panasports can go cheap, just pay shipping.
FM frame rails likewise, will go down on them if you can pay actual shipping.
Still lots of parts available.
Anyone willing to send money today or tomorrow before I put in a paypal deposit will get a good deal.
Panasports can go cheap, just pay shipping.
FM frame rails likewise, will go down on them if you can pay actual shipping.
#69
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Carbing 3pt STB is also back up for sale.
It has a few scratches in the finish, but is still nice, unused (damage from sitting in PO's garage), and fit perfectly when I test fitted it.
I can let that go for $250 shipped obo.
It has a few scratches in the finish, but is still nice, unused (damage from sitting in PO's garage), and fit perfectly when I test fitted it.
I can let that go for $250 shipped obo.
#72
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
I think that is on the 495 beltway somewhere in Northern VA. I can not figure out any other states that have hov signs like that and allow you to open carry.
If I had a bike I would definitely goto the range with my ar-15 like that.
#73
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
STB pretty well sold.
Frame rails spoken for.
Still have:
Eibach 2.5" 200lb/in springs
PWR radiator
new alignment concentric bolts
delrin diff bushings
bosch recirc bov with two flanges
rebuild parts
2 rebuildable motors
engine hoist with load leveler $150 local
Frame rails spoken for.
Still have:
Eibach 2.5" 200lb/in springs
PWR radiator
new alignment concentric bolts
delrin diff bushings
bosch recirc bov with two flanges
rebuild parts
2 rebuildable motors
engine hoist with load leveler $150 local
#75
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Lars, I was looking for that pic like crazy could not find it, thanks for donating to the thread.
Luigi,
I'm glad to hear you like the exhaust. It is a really nice piece, and I knew you'd enjoy it. Spool should be like whoa with it too.
The finish on the Panasports is not the greatest, and I polished one of the lips to see what it would take, but took some paint off the spokes in the process. They are priced accordingly since a set of these without tires usually goes for close to $500, but if finish is important or you don't want to do it then these will not make you happy.
If you are a DIYer which I believe you said, and want to tackle them, or can wait until after finals when I can refinish them (polished lip, graphite centers) then we can work it out. Shipping should be $80-100. Tires are nearly new, and are surprisingly great at the ~200whp level.
Luigi,
I'm glad to hear you like the exhaust. It is a really nice piece, and I knew you'd enjoy it. Spool should be like whoa with it too.
The finish on the Panasports is not the greatest, and I polished one of the lips to see what it would take, but took some paint off the spokes in the process. They are priced accordingly since a set of these without tires usually goes for close to $500, but if finish is important or you don't want to do it then these will not make you happy.
If you are a DIYer which I believe you said, and want to tackle them, or can wait until after finals when I can refinish them (polished lip, graphite centers) then we can work it out. Shipping should be $80-100. Tires are nearly new, and are surprisingly great at the ~200whp level.
#77
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Oh yeah, one more item:
I still have an intercooler I bought off Arkmage that is still over at his house, but I can swing by on Monday to pick it up and ship it.
It's in his thread, but it's the eBay standard with some pretty decent piping, couplers and t-bolts.
I still have an intercooler I bought off Arkmage that is still over at his house, but I can swing by on Monday to pick it up and ship it.
It's in his thread, but it's the eBay standard with some pretty decent piping, couplers and t-bolts.
#79
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Yeah, for someone local I've got quite the setup, especially if you plan on pushing a stock motor to the limit and being ready for the inevitable.
-HF $180 hoist with good load leveler
-HF engine stand
-rebuild tools (hone, micrometer, in/lb and ft/lb torque wrenches
-Rosenthal rebuild kit
-bearings, viton valve stems, ring set
-two blocks, one with known bad rings, the other that's been immaculate upon disassembly, with the head now ported.
-HF $180 hoist with good load leveler
-HF engine stand
-rebuild tools (hone, micrometer, in/lb and ft/lb torque wrenches
-Rosenthal rebuild kit
-bearings, viton valve stems, ring set
-two blocks, one with known bad rings, the other that's been immaculate upon disassembly, with the head now ported.
#80
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Better pics of the panasports:
This is the one I polished the lip on:
Eibach 200lb/in 2.5" x 7.5" springs
BOV
Diff bushings
Full set of eccentrics
I had listed prices earlier in the thread, but am open to offers on all of it.
This is the one I polished the lip on:
Eibach 200lb/in 2.5" x 7.5" springs
BOV
Diff bushings
Full set of eccentrics
I had listed prices earlier in the thread, but am open to offers on all of it.