Gotpsi?'s big part out
Thread Starter
Senior Member
iTrader: (5)
Joined: Jan 2008
Posts: 1,260
Total Cats: 5
From: Central, TX / Bay area, CA
Gotpsi?'s big part out
Well I'm still suffering from my ankle injury back in March, and my evo just spun a bearing so its come down to the track car that I cant drive or my fun daily driver/track car.
I will get and add pics when I can or if they are asked for, I can ship anything, but you will pay for the shipping.
5 Black/bronze 15x9 6UL comes with aluminum lugs with 4 NT01's $900 - sold
sway bars and end links - sold
Cops $250 - sold
MSPNP modded W/ 4bar map. comes with lap top $500
RX7 diff swap W/drive shaft (3 track events on it since built) $600
5 speed $50 - sold
Ported 1.6 head w/ +1 in&ex valves $300
Supertech pistons and belfab rods $500 Still in block
Koni race shocks w/ground control 900/550, I have other rates too. $1000
Tubular turbo manifold for 1.6l w/t3 flange All done in 304 stainless, external waste gate, and down pipe w/ Holset HY35 (turbo needs to be replaced) And exhaust W/ crank case vac set up. $800
Gutted doors $100
Control arms W/ poly bushings all $100 - sold
Depowered rack (needs boot) $40 - sold
Big Intercooler, piping and BOV $100 - sold
Goodwin 4 wheel BBK 2 piece rotors, used coblat friction pads, all ss lines and wilwood bias controler $900 - sold
Black hard top $800 - sold
power mirrors $100
good windshield (pick up only) $40 - sold
190 lbhr fuel pump $40
CX racing radiator (Bent from my splitter getting ripped off but no leaks) $40
Cams Ill have to find the specs but I know they are the OBX 2 or 3? anyways they made a great improvement with my top of the line intake manifold. Both-$300
Chassis with cage - best offer, or Ill scrap it when all else is sold.
Anything else just let me know Ive got the whole car here. How ever it is just a gutted race car no carpet or dash type parts.
[IMG]
[/IMG]
Really old pic of intercooler set up but should give you a general idea.
[IMG]
[/IMG]
I will get and add pics when I can or if they are asked for, I can ship anything, but you will pay for the shipping.
5 Black/bronze 15x9 6UL comes with aluminum lugs with 4 NT01's $900 - sold
sway bars and end links - sold
Cops $250 - sold
MSPNP modded W/ 4bar map. comes with lap top $500
RX7 diff swap W/drive shaft (3 track events on it since built) $600
5 speed $50 - sold
Ported 1.6 head w/ +1 in&ex valves $300
Supertech pistons and belfab rods $500 Still in block
Koni race shocks w/ground control 900/550, I have other rates too. $1000
Tubular turbo manifold for 1.6l w/t3 flange All done in 304 stainless, external waste gate, and down pipe w/ Holset HY35 (turbo needs to be replaced) And exhaust W/ crank case vac set up. $800
Gutted doors $100
Control arms W/ poly bushings all $100 - sold
Depowered rack (needs boot) $40 - sold
Big Intercooler, piping and BOV $100 - sold
Goodwin 4 wheel BBK 2 piece rotors, used coblat friction pads, all ss lines and wilwood bias controler $900 - sold
Black hard top $800 - sold
power mirrors $100
good windshield (pick up only) $40 - sold
190 lbhr fuel pump $40
CX racing radiator (Bent from my splitter getting ripped off but no leaks) $40
Cams Ill have to find the specs but I know they are the OBX 2 or 3? anyways they made a great improvement with my top of the line intake manifold. Both-$300
Chassis with cage - best offer, or Ill scrap it when all else is sold.
Anything else just let me know Ive got the whole car here. How ever it is just a gutted race car no carpet or dash type parts.
[IMG]
[/IMG]Really old pic of intercooler set up but should give you a general idea.
[IMG]
[/IMG]
Last edited by Gotpsi?; Oct 3, 2011 at 07:21 PM.
0
Thread Starter
Senior Member
iTrader: (5)
Joined: Jan 2008
Posts: 1,260
Total Cats: 5
From: Central, TX / Bay area, CA
Price is for all control arms,.that's about what I paid for the bushings by them selves so I figure its a good deal, I may have some head pics, ill have to check, I will sell the head with cams if you want to buy them together $500. The diff swap will come with everything and solid diff bushings that where barely used entire diff assembly, drive shaft, and axels. I built this diff tight, it may chirp the inside tire on tight corners if you are using it on the street, break away is set at 135 lbs.
0
Thread Starter
Senior Member
iTrader: (5)
Joined: Jan 2008
Posts: 1,260
Total Cats: 5
From: Central, TX / Bay area, CA
0
0
Newb
Joined: Apr 2010
Posts: 12
Total Cats: 0
From: Napa/Vallejo CA
Hey man im located in napa/vallejo area and would be interested in your chassis depending on what's left, could you email me a contact or just an email address and ill send you my number. If your free at all this weekend I could come check it out.
DIYroadster@gmail.com
Narek
DIYroadster@gmail.com
Narek
0
Thread Starter
Senior Member
iTrader: (5)
Joined: Jan 2008
Posts: 1,260
Total Cats: 5
From: Central, TX / Bay area, CA
Diff is 4:10, for the sake of everyone wanting to pick up stuff this weekend, ill be racing and won't be around so it will have to bee next weekend. Also I won't be able to strip any parts this weekend.
Druz has dibs on the control arms, then mighty mouse. I won't hold thongs for people unless you are able to pick them up localy so we don't have to do pay pal.
Ok I'll get a shipping qoute on the 6uls ASAP and try to keep up with you guys over the weekend but ill be at the track so if I'm not answering that's why.
Druz has dibs on the control arms, then mighty mouse. I won't hold thongs for people unless you are able to pick them up localy so we don't have to do pay pal.
Ok I'll get a shipping qoute on the 6uls ASAP and try to keep up with you guys over the weekend but ill be at the track so if I'm not answering that's why.
0
