its all good. c u sunday.

 

Still have the full Rx-7 rear end swap, and Koni race coil over setup for sale! Also the head, cams, rods and pistons are still available.

 

Interested in the RX7 rear end...does this use standard RX7 axles? What year is the rear end out of? Thanks brosif

 

Im not sure what year, it comes with the axels and drive shaft. I started with a 1.8 open diff, and a rx-7 carrier, all the internal parts are new from mazda comp. bolts right up no mods required. same as doing a torsen swap but stronger.

 

Interested in the shocks/springs if they are still available. Im a noob so I cant PM. PM me or email at cojimarplumbing at gmail dot com

 

sent you an email and a pic

 

What other rates do you have with the ground controls? Do any bumpstops or tophats come with them?

 

They come with bump stops, I have 700,900,550,350 whoever buys them van have there pick.

 

Just thought I would add some pics Coilovers, These are koni race shocks with ground control coilover sleaves The front shocks are custom built by Performance Shock and are the standard koni yellow length for added travel The rear shocks are standard koni race shocks. rear end, rear comes with drive shaft not shown. This was a open diff from a 1.8 car 4:10 gears, that has been modified with a RX-7 posi, and has solid mounts.

[IMG][/IMG]

[IMG][/IMG]

 

Cool, no tophats it seems. Can you guess how many track hours/miles these have on them?

 

I would have to say between 10-15 events. Track only car

 

Rods and pistons for a 1.8 or a 6?

 

All parts are off 1.6 except rear end. However I am a dealer for supertech, cp and mahle, if you have something in mind I can get it.

 

Is the MSPNP still available, send me a pic just to be sure its the real deal.
Please Thanks!!

 

Here is a pic of the mspnp and lap top. [IMG][/IMG]

 

Still available year end swap with clutch type LSD (stronger than torsen) comes with everything you need. Also still have supertech pistons and belfab rods, ported head and cams (1.6) also still have mspnp that comes with laptop and turbo manifold w/ turbo that comes with down pipe and exhaust.

 

I am interested in the belfab rods and suspension.

 

All suspension is gone, engine and turbo parts I still have

 

Supertech pistons and belfab rods $500 Still in block. What kinda mileage is there on these? Bored?

 

Still in block, around 3000 miles and its the largest bore they sell. Don't remember off the top of my head.