M-Tuned.com/ETD High Flow Fuel Rail - 94-05 Miata 1.8
#101
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
I will ensure Laura@ETD fixes that. I can vouch for you in regards to the address change and having no issues.
Sounds like I should have pictures and a price increase tomorrow if all goes well.
Sounds like I should have pictures and a price increase tomorrow if all goes well.
#103
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
It will go up as soon as the picture is posted. That was always the deal otherwise it would not be fair for the 40-50 people who have already purchased their rails.
Don't hate me, it is not my call, but I do undertsand why it is been done this way and kind of agree.
Don't hate me, it is not my call, but I do undertsand why it is been done this way and kind of agree.
#106
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
Here they are... ETD is short staffed this week due to a tradgic event in someones family. They are picking up the rails on Monday (Shipping next week), but I managed to get some Camera phone pics from last week prior to anodizing, and here they are.
Here they are...
Here is a side view. You will notice the spot for snubber on the underside of the rail. The hole in the middle is a blind hole so you don't have to use it, but can drill it out if you want to run a snubber in that spot. Port on the left is for brass FPR or snubber mount. Great for engine swap cars as you can play with the angle, or even remote mount your FPR!
Bottom Side of the rail. Here you can see how we have made this rail fit both 1.8 Miata heads Better view of snubber mount. The hole in the middle is a blind hole so you don't have to use it, but can drill it out if you want to run a snubber in that spot.
Side view!
Bad close-up picture of snubber mount on underside!
Top View of Mounting tab!
Rails will come with mounting bolts (Hex Head) and 1/4" NPT plug if you choose not to use FPR mount, or are a 99+ Car.
Let me know if you have any questions!
Thanks!! I'm excited.. Gonna install mine on Tuesday as I am off all week!
INTRO PRICE IS NOW OVER.. BUT I WAS ABLE TO GET A LIMITED PRICE OF $119 vs $129 Regular. Visit Http://www.m-tuned.com to purchase your rail!
Here they are...
Here is a side view. You will notice the spot for snubber on the underside of the rail. The hole in the middle is a blind hole so you don't have to use it, but can drill it out if you want to run a snubber in that spot. Port on the left is for brass FPR or snubber mount. Great for engine swap cars as you can play with the angle, or even remote mount your FPR!
Bottom Side of the rail. Here you can see how we have made this rail fit both 1.8 Miata heads Better view of snubber mount. The hole in the middle is a blind hole so you don't have to use it, but can drill it out if you want to run a snubber in that spot.
Side view!
Bad close-up picture of snubber mount on underside!
Top View of Mounting tab!
Rails will come with mounting bolts (Hex Head) and 1/4" NPT plug if you choose not to use FPR mount, or are a 99+ Car.
Let me know if you have any questions!
Thanks!! I'm excited.. Gonna install mine on Tuesday as I am off all week!
INTRO PRICE IS NOW OVER.. BUT I WAS ABLE TO GET A LIMITED PRICE OF $119 vs $129 Regular. Visit Http://www.m-tuned.com to purchase your rail!
Last edited by M-Tuned; 07-10-2008 at 10:30 PM.