Kraken

Sup dudes, I have small offer going on on the T25manifold and downpipe kits

T25 cast manifold, cast elbow and 2.5" downpipe to cat OR 3" open type downpipe. Please note the cast elbow is 2.5" vband then reducer to 3"
4 x stainless steel studs and 4 copper nuts
TIG welded 304l SS everything except the flexible joint, on the 3" its stainless steel
$730 shipped



It will take up to 4 weeks to dispatch, however I have already bought a lot of the stuff that i need to make them so more or less waiting for the manifolds to arrive, there are 5 x 1.6s and 5 x 1.8s manifolds available only

I can also make the lines and fittings, they are 70usd for 1.8s with 3 port fitting or 60usd for 1.6s NAs, if possible please dont order the lines and fittings, really dislike staying on top of them

If you want to go ahead, my paypal is krakn08@gmail.com, in the seller notes please list what you want to order

Available are the following
NA 1.8 and 1.6
NB 1.8 and 1.6
NBFL 1.8 {not 100% sure on the 1.6 NBFL but have one being fitted soon)
EFR 1.6 and 1.8

Some Photos



3" Manifold and DP set



2.5" Manifold, downpipe to cat and lines and fittings





Paypal order should look something like this

1.8 T25 NA 2.5" DP KIT ONLY


1.6 EFR NB DP KIT ONLY
LINES AND FITTINGS



1.6 T25 NB 3" DP KIT ONLY
LINES AND FiTTINGS



Also have a 1.6 NA efr setup that i made in error, currently header-less also 2 weeks wait
STC Muffler but can add 2 more vband sets for future upgrades
$1100 shipped
each extra vband set is 25 usd, vbands are decent and quick release

This is the setup I have, you will be buying exactly what is in the photos




As always you can reach me on facebook or by email krakn08@gmail.com

borka

iTrader: (1)

I've ordered an EFR mani/dp last night, very excited!

huesmann

iTrader: (1)

Out of curiosity, you have these two pics that show downpipes—one shows a regular exhaust flange, and the other a V-band flange (at the end where the cat goes). What gives?

borka

iTrader: (1)

Regular is t25
Vband is EFR

huesmann

iTrader: (1)

Gotcha.

ridethecliche

iTrader: (2)

Depends.

My T25 is V-band. Might be an older picture?

Or maybe I should go double check haha.

atli126

cool stuff, any feedback on this stuff yet? anyone using this already?

borka

iTrader: (1)

you had a special vband exhaust housing on your 2560

in this case one picture is a standard t25 setup and the vband is an EFR setup.



check out his Facebook page.

ridethecliche

iTrader: (2)

I think he's also been offering some magnaflow mufflers on his exhausts. I opted to go with the stocker and have it swapped over here should I feel the need.

Car should be running soon-ish (hopefully) so I'll have some info on things as well.

One thing to note is to use small nuts on the elbow. I had to grind part of the elbow to get the nut to sit flat since its curved. I ended up using a couple of washers to help distribute the load a bit better. He said that grinding was totally find because there's a ton of material there, but I just wanted to err on the side of caution. I'll probably find a smaller bolt soon.

I'll report back once the exhaust is on and I've installed and run things, but honestly the manifold looks very well made and the elbow is super nice as well. I have no complaints right now.

borka

iTrader: (1)

good stuff, im glad its working out for you. looks like good quality parts.

anxiously waiting for my kraken efr setup.

in other news, EFR turbos are sold out in the whole freken country. and i already sold and shipped my turbo setup, so looks like ill be NA for a month or two...

skylinecalvin

iTrader: (2)

I have the kit and while i'm not completely running yet (need to plumb in ebc and tune), i'm more happy with the kit than not. A few things I wish I could've changed. M8 studs instead of M10 on the exhaust manifold. I didn't know he gave M8 as an option. Also, bolting the downpipe onto the turbo was also a pain in the butt requiring somebody rocking it back and forth so I can get the nuts on the studs.

I didn't use his oil line and fittings as they were angled wrong for my situation but they are high quality.

Kraken

I have managed to get a few of the issues sorted, like the studs on the dp side, which I will be providing very soon, well I can provide them now just need to charge extra for them :(

Calvin, do you have the cast elbow or the old welded type ? Realistically stuff can be done better but having to rock it so you can tighten is quite normal on a lot of stuff, if it was easy everyone would be doing it

Seriously I am sort of giving them away at 730 usd, I cant believe only sold one.... anyway once this batch will be done I will really need to ask normal prices, which at the moment is £630 for the dp kit shipped. Well actually its less than that without the VAT(TAX) but then shipping to USA is a lot more than to Europe, so that 20% tax saving will go towards the shipping


Michael

IMSTuner

Are you still selling these?

borka

iTrader: (1)

You really think he went out of business in the 8 days since posting this advertisement?

Or in the 2 days since replying to this thread? his reply is literally above your post.

IMSTuner

So are you saying you know what he has left in stock items? Did I say he went out of business?

borka

iTrader: (1)

I am saying that yes, he is in business and yes he is still selling these.
That is what you asked.

What i think you wanted to ask is, for example;

" Do you still have a 1.8 T25 manifold/dp setup IN STOCK" ?

"are you still selling these"? implies that he might no longer be selling them or out of business.

IMSTuner

Ok ...... fair enough. I sent him a email anyway with what I wanted.

borka

iTrader: (1)

you can also contact him on facebook, i messaged him and he replied almost instantly there.

IMSTuner

I would be doing a EFR and DP setup as well.

503

iTrader: (1)

Just ordered the manifold/downpipe and fittings last night, fast responses on Facebook - looking forward to receiving the setup!