When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've decided to part out the car you may have seen in the classifieds this past couple weeks. Prices do not include shipping, but I am willing to ship any parts you want at your cost.
Flyin Miata Turbo Kit+Megasquirt+ All Supporting Hardware/Lines+Electronics, $3,500, includes (AVAILABLE):
Hardware:
-FM Cast Log Manifold
-Garret 2560R Dual Ball Bearing Water and Oil Turbo
-Turbo OIl and Coolant lines will come attached to turbo if you like, so you can just plug them into your block.
-FM heat shield
-FM Fast Outlet
-FM Downpipe
-FM Silicone Intercooler Piping
-FM Intercooler
-FM silicone intake+MAF delete+K&N Filter+Hood Sealed Heat Shield Intake Box
-Deatchwerks 750cc injectors with plug and play miata pigtails included
Electronics:
-GM Temp sensor with custom aluminum intercooler piping piece to thread directly into charge stream
-DIYautotune boost control solenoid
-AEM Wideband (sensor+gauge+all wiring)
-FM Boost Gauge
-Dual pod A pillar for wideband and boost gauge included
-MS3x with 3 foot harness extension to miata plug and play ECU plug (plugs directly into the factory wiring harness plug with no modifications necessary)
In case anyone is wondering how I decided on a price: To buy this kit new would cost $6,000+ according to what I have found for current pricing. FM wants $4700 for their similair turbo setup, MS3x costs aywhere from $800-$1200, plus I have a bunch of other goodies like boost control, lines, hoses, sensors, injectors that come along with it. I'm open to adjusting my price for good reason but I believe $3,500 is a fair price. It's all in perfect functioning condition.
Roll Bar Kit $600 (PENDING SALE):
Hard Dog Hard Core Double Diagonal
Bolt in harness bar
Roll Hoop Padding
Leather padding cover
Suspension $450 (SOLD):
Koni Yellow Adjustable Shocks
Eibach Springs
Eibach Ground Control
Wheel and Tire Setup, $500:
MB Weapon 16x7 4x100 et38
-One wheel has a small bend on the outer lip, does not affect balance or air seal
Continental Extreme Contact Sport 205/45R16 50% tread life left
NB Miata Small Side Skirt + Mud Flaps Kit, $300 (SOLD):
Never installed after paint
Painted highlight silver metallic
FM 3 IN Turbo Exhaust w/High Flow CAT, $550:
This is the full system from the down pipe to tip
Downpipe is sold with the turbo kit unless you really want it with the exhaust, PM me to ask
Car, 2000 NB Miata, $3,500:
The car will be sold after it is returned to 100% OEM form, PM if interested.
Pictures below, PM for any specific detailed pictures you'd like.
let me know still available,my cell is 415-623-9935.Thx
If you wouldn't mind, please text me so I can try to get the turbo kit from you. I won't need the ECU, but much of the other stuff. 6019379735 if you still have it, thanks!
I'll sell the kit without the ECU if you want! PM me.
Another bump...I'd love to buy it but shipping + insurance would probably kill the deal. Plus, I don't trust it'd make it to me as you sent it (I work for USPS).
Looks like you updated pricing after selling the injectors and ECU, correct? $2600, approximately how many miles? I'd need to source an ECU, injectors, and install a stronger clutch at a minimum. The last time I installed and tuned an MS2 it didn't go well and I gave up. The custom built ECU had at least one hardware issue and the damn LC-1 O2 sensor was flakey despite having perfect wiring (brother is an electrical engineer that verified my wiring job).
Still, SO tempting...any idea on shipping to 55445? LOL! I once turbocharged a 1995 Escort GT using only the GTX manifold/turbo and a Starion intercooler figuring out everything else as I went.
Which oil/water lines are currently on the kit? Also, does it has a blow off valve?
I have the FM oil inlet stainless line with the t block to install it. I have all the turbo hardware installed for the oil return and the water inlet/outlet and those are all rubber lines from FM.
Another bump...I'd love to buy it but shipping + insurance would probably kill the deal. Plus, I don't trust it'd make it to me as you sent it (I work for USPS).
Looks like you updated pricing after selling the injectors and ECU, correct? $2600, approximately how many miles? I'd need to source an ECU, injectors, and install a stronger clutch at a minimum. The last time I installed and tuned an MS2 it didn't go well and I gave up. The custom built ECU had at least one hardware issue and the damn LC-1 O2 sensor was flakey despite having perfect wiring (brother is an electrical engineer that verified my wiring job).
Still, SO tempting...any idea on shipping to 55445? LOL! I once turbocharged a 1995 Escort GT using only the GTX manifold/turbo and a Starion intercooler figuring out everything else as I went.
The quotes for shipping I've been getting are anywhere from $150-300 depending on how far you are from me, Michigan.
How are you handling payment, I.e. PayPal fees that cover the buyer on a large purchase such as this.
At my list price I'll pay the paypal fee.
There's a couple of people that messaged me and wanted me to take lots of $$$$ off the kit+pay for shipping+paypal so I turned them down. But at asking price+shipping I'm paying Paypal fees.
08-27-2019, 09:03 PM
Fm turbo kit
-1
Next time can you simply reply and not quote the entire post with all those pictures?
