Originally Posted by 18psi
(Post 1241222)
I suppose if you took it to a careless/lazy smog tech they'd probably not even notice the difference.
|
The only careless, lazy smog techs I have met could care less if you pass and are too lazy to hold your obd2 connector in place. The cat in cali is because if a CHP looks under your car and you don't have one, it = big trouble, unless you have a 75 or earlier. We call it "Gross polluter" pretty hefty fine IIRC. Not that I would drive a modified car on the street.
|
1 Attachment(s)
Last 2 NB setups were boxed up this morning and dropped off at UPS today.
https://www.miataturbo.net/attachmen...ine=1434823601 |
3 Attachment(s)
I picked up a beat up 93 today for a very good price. It is going to become the mkturbo 1.6 test car. I am thinking going greddygalant style with it and throwing it in the grm2015 challenge this year.
The good thigns are that the motor is strong, has an ebay header and exhaust. Has a 1.8 torsen diff, and poly suspension bushings. Has a godspeed radiator and is seam welded in the engine bay. The not so good is interior is stripped and dash is cut, ac was pulled, doors stripped, random shit missing in the engine bay, no rear lower bumper, driver seat is from a 94+ and held in with 1 bolt. In the trunk and passenger seat well was the majority of the stock crap, along with a wing and an extra set of altezza tail lights. Body is multiple colors and has some dents in weird places. The wheels are honda rims with at least 2 different size tires on the rear. Overall for what I paid and what the plans are for it, it should work nicely for some tomfoolery. https://www.miataturbo.net/attachmen...ine=1435010047 https://www.miataturbo.net/attachmen...ine=1435010047 https://www.miataturbo.net/attachmen...ine=1435010047 |
hahaha
Lars - the hoarder king of MT |
MK Turbo Black Friday beta tester group buy
Pretty sure if I hit the Charleston area and asked where all the Miatas are they'd direct me to your house. :D
|
Ebay cast manifolds appear to be back in stock as well, what nice timing!
|
I'm pretty sure the stretched bottom lip of the bumper should be accentuated and a single tooth or a bunch of dip should be in its lip.
|
Originally Posted by deezums
(Post 1242731)
Ebay cast manifolds appear to be back in stock as well, what nice timing!
Originally Posted by sixshooter
(Post 1242738)
I'm pretty sure the stretched bottom lip of the bumper should be accentuated and a single tooth or a bunch of dip should be in its lip.
|
Originally Posted by sixshooter
(Post 1242738)
I'm pretty sure the stretched bottom lip of the bumper should be accentuated and a single tooth or a bunch of dip should be in its lip.
I vote for the tooth ;) Looks like a pretty nice beater to me. |
lol, no. This is South Carolina.
Big ol' dip all the way. |
Last install update for a couple weeks
8 Attachment(s)
Finally got everything done and started the car this morning prior to going away for 2 weeks!
For some strange reason I had a hard time getting my GT500 injectors to idle (likely my noobness) last night so I threw in the RX8 injectors I'd been running and reset the req_fuel back. Car started right up and runs as it did prior. No time to run any pulls but will when I get back. https://www.miataturbo.net/attachmen...ine=1435252216 Engine bay - front Ebay BOV as spec'd in the thread by Lars. Gotta say the sound is intoxicating :giggle: https://www.miataturbo.net/attachmen...ine=1435252216 Engine bay - hot side The FM box fits with the brackets lowered 1-1/4". Now I've got to get it back to the welder to extend the stainless shielding. For now I bolted aluminum to it with a heat mat on the inside. https://www.miataturbo.net/attachmen...ine=1435252216 Engine bay - cold side Not much to say here. https://www.miataturbo.net/attachmen...ine=1435252216 Rear - muffler view The tilt of the muffler is really not noticeable at all and the sound is pretty nice. Not loud at all and quiet enough that when it drops to an idle you really have to listen to see if the car is running. I did take it out and ran it a couple miles and the pull in 2nd up is really nice and smooth. All in all, I'm really pleased with everything. Fit was perfect and no leaks at all. |
Originally Posted by bahurd
(Post 1243677)
For some strange reason I had a hard time getting my GT500 injectors to idle
|
Originally Posted by sonofthehill
(Post 1243892)
I had to increase my VE table significantly when I swapped out my stock ev6's for the GT500's. Also had to play with reducing the warm up enrichment a bunch. They are working quite well but the settings are very different my old injectors. Sometimes in ways that didn't seem logical.
|
1 Attachment(s)
Update beware of the eBay poly hangers. Mine were slightly melting allowing the exhaust to jump around. I'm going with regular rubber. I've had better luck with it and I can get it locally. Even with the clamp wrapped around it they sag. I'll post a vid as soon as it uploads. I had a couple extra old rubber ones and I swapped two of the five hangers and got a major improvement. So I'll go to the store later and swap them all out.
https://www.miataturbo.net/attachmen...ine=1435418730 |
1 Attachment(s)
Have you all ever seen a 2007 mini cooper r56 exhaust hanger? It's rubber, but with a built in strap that acts like a hose clamp. I'm thinking of trying some of these because my hose clamps like to walk off my rubber hangers every now and again.
https://www.miataturbo.net/attachmen...ine=1435419087 Mini tax is worse than corvette tax though, there's at least two per mini, gonna try to find used ones... |
Originally Posted by ScottyP3821
(Post 1244281)
Update beware of the eBay poly hangers. Mine were slightly melting allowing the exhaust to jump around. I'm going with regular rubber. I've had better luck with it and I can get it locally. Even with the clamp wrapped around it they sag. I'll post a vid as soon as it uploads. I had a couple extra old rubber ones and I swapped two of the five hangers and got a major improvement. So I'll go to the store later and swap them all out.
|
poly ones all sag. stick with black rubber.
|
MK Turbo Black Friday beta tester group buy
Originally Posted by y8s
(Post 1244374)
poly ones all sag. stick with black rubber.
|
Are you saying that the melting caused the holes to elongate?
|
All times are GMT -4. The time now is 01:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands