Parting 96 open track car, BEGI, FM, Hydra, Tein, BBK, etc
#101
Senior Member
Thread Starter
iTrader: (8)
Join Date: Mar 2006
Location: Floriduh
Posts: 884
Total Cats: 0
BTW, the engine has been set up for a coolant reroute. The water neck and thermostat are in the rear, the head is tapped for the heater core, and the former waterneck area is plugged and the coolant temp sensor was tapped and installed into the plug. I can include the OEM waterneck and whatever other oem parts the purchaser would want, plus a load of hoses and tubing to DIY coolant reroute. There's also a set of Mazda Competition engine mounts on the engine right now I'd let go with it. I want nothing left in storage or on the car by the time I send it to the scrapper. I'll also include 7 quarts of Amsoil 10w30 and a new Amsoil oil filter if the price is right. The engine also has the OEM oil cooler attached to it that will go with it.
As I mentioned before, I have receipts for most of the parts and work on the engine. Once it's out of the car I'll take some photos. I still have to remove it and the transmission. Most everything else people have asked for has been removed, so I just have to box it all up.
#103
Senior Member
Thread Starter
iTrader: (8)
Join Date: Mar 2006
Location: Floriduh
Posts: 884
Total Cats: 0
This is what's left
fuel pump, but Sam Navy has first dibs
headliner kit for soft top
manual rack with new tie rod ends and Prothane or Super Pro (got them from Emilio) mounts
the engine
the fuel rail if someone buying the engine doesn't want it
RC engineering 550 cc injectors with Miata adapter plugs
Volk CE28 wheels and RS2 tires, including full set of 949racing aluminum lugs
Panache big brake kit
Hydra Nemesis with all the trimmings
3.90 torsen rear end with Mazda Comp diff mounts, axles, driveshaft, etc if needed
OEM 1996 steering wheel
Momo Champion steering wheel and Finishline Performance plug and play hub
FM carbon fiber heat extractor hood
Hard top with rear defroster option and the mounts and defroster switchgear if needed
soft top, tan vinyl from AAC Bestco with 10% tint rear soft window - someone had dibs right now
oem front 20mm swaybar
oem passenger airbag
oem seats with MX5 upgrade headrest speakers, tan
full tan interior outstanding condition, has the oem faux woodgrain finish
remanufactured brake master cylinder and reservoir
almost new high torque starter
braided stainless clutch hose
oem fans
oem spare tire with vinyl cover, oem jack and lug wrench
Pioneer aftermarket CD stereo XM radio ready, 45w per channel, great shape, nice sound
oem power radio antenna
oem static antenna
turbo blanket, new unused
BEGI S4 turbo kit, 2871 turbo, largest IC BEGI sells, stainless hoses, kit is new and complete
oem PPF
various oem parts from engine bay and trunk, trunk carpet black in great shape
various belts and hoses
power windows
power mirrors
If someone expressed an interest and I didn't state it here, sorry about that and please re-email me. Thanks.
fuel pump, but Sam Navy has first dibs
headliner kit for soft top
manual rack with new tie rod ends and Prothane or Super Pro (got them from Emilio) mounts
the engine
the fuel rail if someone buying the engine doesn't want it
RC engineering 550 cc injectors with Miata adapter plugs
Volk CE28 wheels and RS2 tires, including full set of 949racing aluminum lugs
Panache big brake kit
Hydra Nemesis with all the trimmings
3.90 torsen rear end with Mazda Comp diff mounts, axles, driveshaft, etc if needed
OEM 1996 steering wheel
Momo Champion steering wheel and Finishline Performance plug and play hub
FM carbon fiber heat extractor hood
Hard top with rear defroster option and the mounts and defroster switchgear if needed
soft top, tan vinyl from AAC Bestco with 10% tint rear soft window - someone had dibs right now
oem front 20mm swaybar
oem passenger airbag
oem seats with MX5 upgrade headrest speakers, tan
full tan interior outstanding condition, has the oem faux woodgrain finish
remanufactured brake master cylinder and reservoir
almost new high torque starter
braided stainless clutch hose
oem fans
oem spare tire with vinyl cover, oem jack and lug wrench
Pioneer aftermarket CD stereo XM radio ready, 45w per channel, great shape, nice sound
oem power radio antenna
oem static antenna
turbo blanket, new unused
BEGI S4 turbo kit, 2871 turbo, largest IC BEGI sells, stainless hoses, kit is new and complete
oem PPF
various oem parts from engine bay and trunk, trunk carpet black in great shape
various belts and hoses
power windows
power mirrors
If someone expressed an interest and I didn't state it here, sorry about that and please re-email me. Thanks.
#104
Add the steering rack and all the related parts you want to throw in to my other stuff!
Hopefully that includes the idler pully and belt since I'll be removing the power steering pump. Need the idler pully and bracket that goes where the pump used to be!
Hopefully that includes the idler pully and belt since I'll be removing the power steering pump. Need the idler pully and bracket that goes where the pump used to be!
#106
Senior Member
Thread Starter
iTrader: (8)
Join Date: Mar 2006
Location: Floriduh
Posts: 884
Total Cats: 0
The BBK includes 2 sets of Cobalt GT Sport pads (1 new 1 used), 1 set of rear HP+ pads, and 5-6 sets of assorted front and rear Cobalt and Porterfield racing pads (absolutely no street use, they'll tear up the rotors) I have to count the boxes, a Wilwood adjustable prop valve and some brake tubing to MC, a bag of extra rotor fasteners (since 2-piece rotors) and extra Wilwood caliper seals. Front calipers are nearly new, rear calipers are reman units and have the emergency brake hookup that is PnP with OEM Miata cables, all mounting fasteners, stainless brake lines, and a can of ATE Super Blue fluid if you want it. If you want to go total replacement, I have a new in the box brake MC with reservoir. I am reasonable with the price, but not retarded.
#107
Senior Member
Thread Starter
iTrader: (8)
Join Date: Mar 2006
Location: Floriduh
Posts: 884
Total Cats: 0
Go to Parts pictures by soflarick - Photobucket for updated photos. There are too many to copy and paste.
Headliner kit is out. Harness bar is out and being boxed. Rollbar is out and I'll include the shelf panel that is trimmed to fit the bar. Both are sold, just updating buyers. Both include the fasteners.
Headliner kit is out. Harness bar is out and being boxed. Rollbar is out and I'll include the shelf panel that is trimmed to fit the bar. Both are sold, just updating buyers. Both include the fasteners.
#108
just got the APR seat an hour ago. picked it up from the greyhound station in my miata, flipped it upside down and put it in the passenger seat.........hahaha STILL had plenty of room.
cant wait to install it tonight or in the morning!
will let you know about the steering wheel and adapter after i drive it for a day.
cant wait to install it tonight or in the morning!
will let you know about the steering wheel and adapter after i drive it for a day.
#109
Senior Member
Thread Starter
iTrader: (8)
Join Date: Mar 2006
Location: Floriduh
Posts: 884
Total Cats: 0
Light, isn't it. It will bolt right into the driver side. Let me know about the steering wheel. Couple people want the wheel or hub, but I'd like to sell it as one unit. I'll throw in the spacer as well if you want it. I thought I still had my pullers, can't find them, so I have to go to Autozone to rent a puller for the hub. I'm not going to beat on it to get it out.
Anyone interested in the 3.90 torsen diff with Mazda Comp bushings, I'll sell it alone or with the axles and driveshaft, whichever.
Anyone interested in the 3.90 torsen diff with Mazda Comp bushings, I'll sell it alone or with the axles and driveshaft, whichever.
#114
Senior Member
Thread Starter
iTrader: (8)
Join Date: Mar 2006
Location: Floriduh
Posts: 884
Total Cats: 0
http://forum.miata.net/vb/attachment...1&d=1172265080
http://forum.miata.net/vb/attachment...1&d=1172265087
http://forum.miata.net/vb/attachment...1&d=1172265150
http://forum.miata.net/vb/attachment...1&d=1172265159
http://forum.miata.net/vb/attachment...1&d=1172265208
http://forum.miata.net/vb/attachment...1&d=1172265165
Photos I posted on m.net when I was building the engine. Crank was just removed from the lathe, it was polished and balanced later.
http://forum.miata.net/vb/attachment...1&d=1172265087
http://forum.miata.net/vb/attachment...1&d=1172265150
http://forum.miata.net/vb/attachment...1&d=1172265159
http://forum.miata.net/vb/attachment...1&d=1172265208
http://forum.miata.net/vb/attachment...1&d=1172265165
Photos I posted on m.net when I was building the engine. Crank was just removed from the lathe, it was polished and balanced later.
#115
Want to sell the front bumper?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#117
Wont be around over the weekend but maybe next week some time I can come over.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#119
I can still come over and pick everything up. Would all fit in my pickup much easier.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote