Sadfab D585 Coil Kit
#1
Sadfab D585 Coil Kit
$125 shipped USA
This was originally a batch fire harness, I converted it to sequential and have the wires labeled for whatever plug(s) you end up putting on these.
I can probably get this wired up to be PNP for your car if you let me know what you have and I have the connectors available. I should have 2 3-pin coil shells that originally came with this harness somewhere.
- Bracket
- Harness (needs plugs for your car end, I might be able to help depending on what you have)
- Coils
- New Accel wires
- Old NKG wires if wanted
This was originally a batch fire harness, I converted it to sequential and have the wires labeled for whatever plug(s) you end up putting on these.
I can probably get this wired up to be PNP for your car if you let me know what you have and I have the connectors available. I should have 2 3-pin coil shells that originally came with this harness somewhere.
#3
I'm reusing the 6pin pigtail for my 95 currently. Not sure why, but I should have just left it alone and ordered a new one from Ballenger.
Cheap enough if you want to DIY yourself, or I guess I can get it all back together first, shouldn't take much time.
94/95 happen to have two spots in the stock harness connector that you can use for sequential. On my car I depinned the tachout wire from the harness and taped it back. Then I ran a pair of wires from the options port on my MS3 right to the factory 6 way. I had the harness that I have for sale as PNP for sequential.
96/97 went to 3 wire coil packs so they use a 4pin connector like NA6 do. There's a slim chance that the 95.5 also have the 4 way too, you should check what grey connector goes up to your coil packs.
Cheap enough if you want to DIY yourself, or I guess I can get it all back together first, shouldn't take much time.
94/95 happen to have two spots in the stock harness connector that you can use for sequential. On my car I depinned the tachout wire from the harness and taped it back. Then I ran a pair of wires from the options port on my MS3 right to the factory 6 way. I had the harness that I have for sale as PNP for sequential.
96/97 went to 3 wire coil packs so they use a 4pin connector like NA6 do. There's a slim chance that the 95.5 also have the 4 way too, you should check what grey connector goes up to your coil packs.
#4
Ah hell, I thought I responded earlier today but must not have hit the post button.
Sounds good. I have the 6-pin connector on mine so if you’re willing to throw in the pigtail, I’ll wire it up myself. Lemme know if that works for you.
Shoot me a PM with your email and I’ll shoot you the money and my address.
Sounds good. I have the 6-pin connector on mine so if you’re willing to throw in the pigtail, I’ll wire it up myself. Lemme know if that works for you.
Shoot me a PM with your email and I’ll shoot you the money and my address.
#5
Ah hell, I thought I responded earlier today but must not have hit the post button.
Sounds good. I have the 6-pin connector on mine so if you’re willing to throw in the pigtail, I’ll wire it up myself. Lemme know if that works for you.
Shoot me a PM with your email and I’ll shoot you the money and my address.
Sounds good. I have the 6-pin connector on mine so if you’re willing to throw in the pigtail, I’ll wire it up myself. Lemme know if that works for you.
Shoot me a PM with your email and I’ll shoot you the money and my address.
Thread
Thread Starter
Forum
Replies
Last Post
cpierr03
General Miata Chat
15
08-16-2021 12:13 PM
nigelt
Miata parts for sale/trade
24
10-09-2018 01:46 PM