SADFab

We are now offering MR2 hubs ready to go for Miata. What is this you ask?

Its well known the miata hubs leave a few things to be desired. The rears have been known to shear off and break in extreme cases and you end up loosing a wheel, damaging your mobile hair salon and ruining your track day at best, or killing someone at worst.

Credit to @GeneSplicer for discovering that the toyota MR2-S hub from 2000-05 will fit with some modifications. They are 4x100 pattern, use the same stud thread pitch and length as a factory miata hub, and are substantially thicker with much more desirable machining radii and therefor should be much stronger. This may be the last time you replace the rear hubs as a preventative safety measure! The discussion for these can be seen here: https://www.miataturbo.net/race-prep...cussion-94420/

Pair of hubs shipped in the US is $175
Add $50 for a pair of Timken bearings.
Add $80 for extended length ARP studs, installed.

The hubs fit all NA/NB miatae with any brake combination(OEM na6, na8, nb, sport, wilwood, stoptech, etc) and use Miata rear wheel bearings. The ARP studs are 1" longer than stock at 2.6" vs 1.6".

2003 and up miatas do not use a rear wheel seal, and will cause some or all 03+ axles to bind on the seal, if installed. Please specify if you have an 03+ miata or axles, when ordering.

Orders can be placed at orders.sadfab.com or email info@sadfab.com

psyber_0ptix

iTrader: (4)

1. stevos555
2. mr_hyde
3. Psyber_0ptix (w/ ARP and bearings)
4.

Arca_ex

iTrader: (2)

1. stevos555
2. mr_hyde
3. psyber_0ptix
4. Arca_ex
5.

Efini~FC3S

iTrader: (4)

motorphile

iTrader: (1)

1. stevos555
2. mr_hyde
3. psyber_0ptix
4. Arca_ex
5. Efini~FC3S
6. motorphile
7.

I'd prefer to go ARP as well.

Silentoreo34

iTrader: (30)

compaddict

afm

iTrader: (3)

Y'all are trolling with the separate ARP notes.


List:

DNMakinson

iTrader: (3)

Do they use standard rear Miata bearings?

UrbanSoot

iTrader: (24)

Sign me up (with ARP).


Y'all need to learn how to use Google Forms.

shuko

List:9. shuko (w ARP and bearings)

nigelt

iTrader: (10)

I'd wager they know how, but this method keeps the thread at the top and creates fomo. Dirty scoundrels.

paNX2K&SE-R

iTrader: (8)

List:9. shuko (w ARP and bearings)
10. paNX2K&SE-R (w/ARP)

M2Ken

phocup

List:
1. stevos555
2. mr_hyde
3. psyber_0ptix (w ARP)
4. Arca_ex
5. Efini~FC3S (w ARP)
6. motorphile (w ARP)
7. Silentoreo34
8. Compaddict (w ARP)
9. shuko (w ARP and bearings)
10. paNX2K&SE-R (w/ARP)
11. M2Ken w/ ARP and bearings
12. Phocup

UrbanSoot

iTrader: (24)

Fine, I'll cave.

List:
1. stevos555
2. mr_hyde
3. psyber_0ptix (w ARP)
4. Arca_ex
5. Efini~FC3S (w ARP)
6. motorphile (w ARP)
7. Silentoreo34
8. Compaddict (w ARP)
9. shuko (w ARP and bearings)
10. paNX2K&SE-R (w/ARP)
11. M2Ken w/ ARP and bearings
12. Phocup
13. UrbanSoot w/ ARP and bearings

Gee Emm

List:
1. stevos555
2. mr_hyde
3. psyber_0ptix (w ARP)
4. Arca_ex
5. Efini~FC3S (w ARP)
6. motorphile (w ARP)
7. Silentoreo34
8. Compaddict (w ARP)
9. shuko (w ARP and bearings)
10. paNX2K&SE-R (w/ARP)
11. M2Ken w/ ARP and bearings
12. Phocup
13. UrbanSoot w/ ARP and bearings
14. Gee Emm (w/bearings, maybe ARP, maybe not - see email)

Seeing these have to travel Dunnunda, my interest is freight-sensitive.

GeneSplicer

iTrader: (14)

Do I get royalties??

Roda

List:
1. stevos555
2. mr_hyde
3. psyber_0ptix (w ARP)
4. Arca_ex
5. Efini~FC3S (w ARP)
6. motorphile (w ARP)
7. Silentoreo34
8. Compaddict (w ARP)
9. shuko (w ARP and bearings)
10. paNX2K&SE-R (w/ARP)
11. M2Ken w/ ARP and bearings
12. Phocup
13. UrbanSoot w/ ARP and bearings
14. Gee Emm (w/bearings, maybe ARP, maybe not - see email)
15. Roda w/ ARP and bearings

Awesome work guys!

EErockMiata

Do these maintain standard track width in the rear?