FS: miata leftovers, BBS parts
09-04-2012, 09:40 PM
#1
Senior Member
Thread Starter
iTrader: (9)
Join Date: Jun 2007
Location: NH
Posts: 1,013
Total Cats: 21
FS: miata leftovers, BBS parts
cleaning up shop!
$75: Nardi Prestige wooden shift ****:
$10 each: Front thermostat housing with the T removed and a black 6-an bung threaded in: The rear waterneck has a brass 1/8" NPT JB welded in for a water temp sensor. This was a temporary solution, but it didn't leak on me. I only removed these to do a coolant reroute.
$5: miata cruise control switch
$25: Tein 8K springs from my Tein RA coilovers. I never ran them. They should work with flex and possibly basics as well.
$25: brand new still in the box g2 caliper paint, orange in color
$30: brand new lower ball joints and tie rod ends. I bought these from a local auto parts store back in RI, and since I now live in NH have no means of returning them.
$40: AWR Mazda factory competition diff mount. Used on my car for ~3000 miles. It's dirty, sorry!
$15: 1.8 miata throttle body from a running 95 manual miata (complete with all sensors). It's a little dusty.
$15: Apexi turbo timer. Someone gave me this, I have had it for like 2 years, have no plans to use it. I have a sneaky suspicion it isn't real, hence the low price.
$20 each: BBS 1/2 height center caps, I have 3. They each will come with one of the original BBS logo center snap in covers too, which aren't in the pics. They could use a wetsand/polish.
$20: BBS tall center cap. It will come with one of the original BBS logo center snap in covers as well, which again isn't pictured. Could use a wetsand/polish.
$150: 4 original 1" BBS RS 15" lips. There are 2 small rash marks on one (lower right). With a little elbow grease they'll shine up nice.
$75: Nardi Prestige wooden shift ****:
$10 each: Front thermostat housing with the T removed and a black 6-an bung threaded in: The rear waterneck has a brass 1/8" NPT JB welded in for a water temp sensor. This was a temporary solution, but it didn't leak on me. I only removed these to do a coolant reroute.
$5: miata cruise control switch
$25: Tein 8K springs from my Tein RA coilovers. I never ran them. They should work with flex and possibly basics as well.
$25: brand new still in the box g2 caliper paint, orange in color
$30: brand new lower ball joints and tie rod ends. I bought these from a local auto parts store back in RI, and since I now live in NH have no means of returning them.
$40: AWR Mazda factory competition diff mount. Used on my car for ~3000 miles. It's dirty, sorry!
$15: 1.8 miata throttle body from a running 95 manual miata (complete with all sensors). It's a little dusty.
$15: Apexi turbo timer. Someone gave me this, I have had it for like 2 years, have no plans to use it. I have a sneaky suspicion it isn't real, hence the low price.
$20 each: BBS 1/2 height center caps, I have 3. They each will come with one of the original BBS logo center snap in covers too, which aren't in the pics. They could use a wetsand/polish.
$20: BBS tall center cap. It will come with one of the original BBS logo center snap in covers as well, which again isn't pictured. Could use a wetsand/polish.
$150: 4 original 1" BBS RS 15" lips. There are 2 small rash marks on one (lower right). With a little elbow grease they'll shine up nice.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Rudes333
Miata parts for sale/trade
17
11-05-2015 01:16 PM
SuperSneakySecretSquirrel
Meet and Greet
5
09-06-2015 08:30 PM
