Instructions for MS Labs Basic MS3 ECUs
#1
Elite Member
Thread Starter
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,979
Total Cats: 356
Instructions for MS Labs Basic MS3 ECUs
For version 3.0+ (square box, not the longer rectangular box).
Colors for the DB37 may differ for older 2014-2015 units (which don't have the entire DB37 populated with wires). In this case, open the DB37 and look at the pins numbers, which still apply.
For a variety of reasons, we can't provide basemaps here. If you are an original owner, email us with your serial number and we will provide your original basemap or an updated basemap. If your ECU is second hand, you'll have to work with whatever map is inside the ECU.
Colors for the DB37 may differ for older 2014-2015 units (which don't have the entire DB37 populated with wires). In this case, open the DB37 and look at the pins numbers, which still apply.
- 90-97 1.6L and 94-95 1.8L: https://www.mslabs.gr/documentation/...5_v32_fw14.pdf
- 96-97 1.8L (three plug ECU): https://www.mslabs.gr/documentation/...7_v32_fw14.pdf
- 99-00 1.6 and 1.8L: https://www.mslabs.gr/documentation/...0_v32_fw14.pdf
- 01-05 1.6L and 1.8L: https://www.mslabs.gr/documentation/...5_v32_fw14.pdf
For a variety of reasons, we can't provide basemaps here. If you are an original owner, email us with your serial number and we will provide your original basemap or an updated basemap. If your ECU is second hand, you'll have to work with whatever map is inside the ECU.
Thread
Thread Starter
Forum
Replies
Last Post