Instructions for MS Labs Basic MS3 ECUs
Thread Starter
Joined: Jun 2006
Posts: 6,020
Total Cats: 369
From: Athens, Greece
Instructions for MS Labs Basic MS3 ECUs
For version 3.0+ (square box, not the longer rectangular box).
Colors for the DB37 may differ for older 2014-2015 units (which don't have the entire DB37 populated with wires). In this case, open the DB37 and look at the pins numbers, which still apply.
For a variety of reasons, we can't provide basemaps here. If you are an original owner, email us with your serial number and we will provide your original basemap or an updated basemap. If your ECU is second hand, you'll have to work with whatever map is inside the ECU.
Colors for the DB37 may differ for older 2014-2015 units (which don't have the entire DB37 populated with wires). In this case, open the DB37 and look at the pins numbers, which still apply.
- 90-97 1.6L and 94-95 1.8L: https://www.mslabs.gr/documentation/...5_v32_fw14.pdf
- 96-97 1.8L (three plug ECU): https://www.mslabs.gr/documentation/...7_v32_fw14.pdf
- 99-00 1.6 and 1.8L: https://www.mslabs.gr/documentation/...0_v32_fw14.pdf
- 01-05 1.6L and 1.8L: https://www.mslabs.gr/documentation/...5_v32_fw14.pdf
For a variety of reasons, we can't provide basemaps here. If you are an original owner, email us with your serial number and we will provide your original basemap or an updated basemap. If your ECU is second hand, you'll have to work with whatever map is inside the ECU.
1
Thread
Thread Starter
Forum
Replies
Last Post
