Hey guys been a long time since I have been back. Bought a mspnp2 it just arrived time to pull t0e aem fic6 off and install this bad boy. Shooting for low 20psi on my big16g turbo with e85 hopefully. The motor has low 9.0 to one compression positions rods and headstuds. No tranny work only a clutch this is on a 96 1.8 255 lph Wally and 550 cc rx7 injectors. Now hard will it be to tune for e85,? I have used tuernstudio or whatever the better tuning platform for my 90 talon tsi awd I think it's efi live or something like that. Anyways is the anything I should be prepared for? In installed ms1 standalone In my old talon and that was a pain in the *******

 

I'm going to have to solder the main harness back together where it plugs into the ecu. I forgot that the piggyback is spliced into the main harness.

 

With E85 tuning, just put in 9.85 for your air/fuel ratio when you calculate Required Fuel, and you can run a bit more timing. It's fairly straightforward.

 

Ok cool I'm wanting to get that flex sensor for it too

 

I think you will need larger injectors for E85.