I looked around and couldnt find any info on this..

So has anyone here tried running the stock evo injectors? I know I will need to get the right injector clips and I have that part taken care of (www.spoolinup.com).

The 560cc are low-impendence. And they are the same height as the miata injectors..

I have these sitting around so it could save me $200 if I can use them... I might just wire them up and try them out.

Any help is greatly appreciated.

 

Anyone? Anyone? Beuller? Lol

 

IIRC they are a touch shorter than miata injectors, by a few mm, so it may require removing the rail spacers.

with that being said, why wouldnt they work with ms, after you take of the low-ohm business.......................................... ...............

 

I guess ill just try them out. and I just double checked the height of the stock blue tops to the evo 9 560ccs. They have a .010 of difference.. I will just have to install them to find out. Ill report back with the injector settings for the evo9 injectors.. I know that the stock evo 8/9 ecu have the injector cc setting to 513cc for the 560cc.. So I might have to play around a bit to get the right numbers

 

AbeFM ran EVO8 injectors with MS, but he doesn't post here much anymore. That's where I got the idea, I run the same injectors with Adaptronic. Any ECU will control low-z injectors.

 

Thanks for the info. Im just waiting for my evo 9 bov so I can get the tune nailed down with the evo 9 injectors

 

so what is the latest prognosis on the evo 560cc injectors? my friend is giving me his today and im installing the greddy e-ultimate. in the instructions the greddy says to use the same resistance injectors as stock so i was curious if the resistance was even the same. lmk what you found out about the evo injectors and how you made them fit. thanks

 

Stock are high imp, EVO9 are low- imp. So no, only use them with a full standalone that supports them.

 

the rx7 440 work just fine right? does anyone know anything about the greddy e-ultimate?

 

We only do MS here.

 

Lol all the stuff he asked was in earlier.posts.. He needs touse his brain and read.

But fyi. I ended up getting a set of 460cc and keeping it simple.by staying with high ohm injectors

 

Lol all the stuff he asked was in earlier.posts.. He needs touse his brain and read.

But fyi. I ended up getting a set of 460cc and keeping it simple.by staying with high ohm injectors