Oil pressure sensor input for MSPNP2
 

Hi,
I have a turbo 1.6 racecar running MSPNP2.
Is it possible to connect an aftermarket oil pressure sensor to the MSPNP2? I'm not a good enough driver to keep an eye on the factory oil pressure guage through the corners, so logged data would be somewhat handy to see if pressure dropped significantly during a race.
If anyone has done this, I'd love to know how you did it and what sensor you used.
I have a remote oil filter adapter with threaded sensor ports available.
Thanks.

You’d want to use a spare analog input, which are 0-5v. Any sensor that outputs a 0-5v signal will do, anywhere from a $15 from eBay to a $160 AIM sensor. Transducer style ones are really small, but need to be remote mounted, they can’t survive the vibrations of being mounted directly to a hard surface like a block. Diagram style like the OE 90-94 sensor are big and bulky but very robust.

Once you wire the 0-5v input to the MS, I’m a little unsure how to properly display it as usable data, since all my experience comes from ms3s. I’m not sure if newer ms2 firmware includes any generic sensor programming

Check this post.

Thanks. I saw this post but I'm unsure if it will work on an MSPNP2. Probably worth a shot.

I have not played with a MS2 in a long time, but I would assume it will have very similar options for these.