ATI damper & A/C - P/S belt not issues
#1
ATI damper & A/C - P/S belt not issues
I have a 95M. It will be my daily driver and weekend track toy along with the occasional playing with Mustangs, Camaros, and Vets. It has a built 1.9 with a flying Miata turbo kit that is intercooled. It has an ATI fluid damper (ATI-918522) installed but I can't get the A/C & P/S belt to go on the pulleys. I want to keep my A/C but I can't seem to find a 4 rib belt long enough to work with the set up. The longest I have been able to find is Continental's 4040372 serpentine belt. It's 956 mm long and still not long enough to go onto the P/S & A/C pulleys with it loosened to the point where it is toughing the A/C pulley.
#3
The longest 4k belt I was able to find sold by Gates is approximately 94" long.
Here are the data points you need. (use link below)
Search:
.56 top width belts
K Section
4-Rib
Use the string method to figure out the length you need, and plug that number into that search tool. Then, use a cross-reference tool to see what other manufacturers have what you need locally.
https://www.gates.com/us/en/automoti...00-000001.html
Here are the data points you need. (use link below)
Search:
.56 top width belts
K Section
4-Rib
Use the string method to figure out the length you need, and plug that number into that search tool. Then, use a cross-reference tool to see what other manufacturers have what you need locally.
https://www.gates.com/us/en/automoti...00-000001.html
Thread
Thread Starter
Forum
Replies
Last Post