real hks kit of 1.8
#10
Elite Member
iTrader: (24)
Join Date: Jun 2007
Location: Woodland Hills, CA
Posts: 4,667
Total Cats: 18
looks easy enough... few things to keep in mind:
- deepstick would have to come out because it might block the flow
- need a lock on top of tube so oil doesnt spill out
- need to keep tube length same as stock to get correct readings with deepstick
- is the tube wide enough?
putting a fitting on tube is an easy part...
- deepstick would have to come out because it might block the flow
- need a lock on top of tube so oil doesnt spill out
- need to keep tube length same as stock to get correct readings with deepstick
- is the tube wide enough?
putting a fitting on tube is an easy part...
#13
looks easy enough... few things to keep in mind:
- deepstick would have to come out because it might block the flow
- need a lock on top of tube so oil doesnt spill out
- need to keep tube length same as stock to get correct readings with deepstick
- is the tube wide enough?
putting a fitting on tube is an easy part...
- deepstick would have to come out because it might block the flow
- need a lock on top of tube so oil doesnt spill out
- need to keep tube length same as stock to get correct readings with deepstick
- is the tube wide enough?
putting a fitting on tube is an easy part...
THere was one incident which one of the HKS turbo car blew his engine, and oil got squirt out from the dip stick tube onto the ex. manifold which caught on fire.
#16
When i had my gti, i thought about doing this, since the dipstick went straight into a rubber fitting on the side of the pan.
Might have to see if i can figure something out for the miata this weekend... could cut the dipstick tube, flare it, and put a brass T in there... but would it be able to flow enough oil?
Might have to see if i can figure something out for the miata this weekend... could cut the dipstick tube, flare it, and put a brass T in there... but would it be able to flow enough oil?
#19
Elite Member
iTrader: (24)
Join Date: Jun 2007
Location: Woodland Hills, CA
Posts: 4,667
Total Cats: 18
well, dont forget that hks actually supplies you with a replacement tube. we are talking about cutting oem tube. Mimime, can you take dimensions of return line and dipstick tube from hks turbo car you mentioned earlier?
#20
Junior Member
iTrader: (1)
Join Date: Jul 2007
Location: Johannesburg, South Africa
Posts: 109
Total Cats: 0
use a spring on the dipstick end to keep it in place and sealed
the DSM guys running BOOST often do this
http://www.dsmtuners.com/forums/151056565-post307.html
https://secure.buschurracing.com/cat...c94a7d420ab4b2
the DSM guys running BOOST often do this
http://www.dsmtuners.com/forums/151056565-post307.html
https://secure.buschurracing.com/cat...c94a7d420ab4b2