Notices
Prefabbed Turbo Kits A place to discuss prefabricated turbo kits on the market

It finally happened....Kaboooom!

Old Jul 22, 2006 | 01:31 PM
  #1  
MiataNuTca's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2004
Posts: 191
Total Cats: -2
From: Windsor, Canada
Default It finally happened....Kaboooom!

Well, on the way to coffee this morning, I got off one of the local expressways for a bit of a ride. At the light I accelerated somewhat spirited from the green light (no clutch drops or anything), and I heard an aweful ping and crunching sound from my rear. I knew what it was right away, none of the gears were able to engage, and it sounded horrible if I tried engaging the clutch.......Yippeee, now I get to upgrade to the 1.8 finally. Here's a pick of the magnetic diff drain bolt...

Hopefully I'll have her up and running by next weekend. Anyone wanna sell me a Torsen? Pumpkin, halfshafts, stubs, and driveshaft please.
Attached Images
File Type: jpg
brokenrear.JPG (377.3 KB, 111 views)

Last edited by MiataNuTca; Jul 22, 2006 at 03:19 PM.
Old Jul 22, 2006 | 01:32 PM
  #2  
Philip's Avatar
Elite Member
 
Joined: Dec 2004
Posts: 3,270
Total Cats: -4
Default

oopsie.
Old Jul 22, 2006 | 01:57 PM
  #3  
brgracer's Avatar
Senior Member
iTrader: (14)
 
Joined: Nov 2004
Posts: 1,275
Total Cats: 1
From: Ambler, PA
Default

Welcome to the club. It's a pain in the ***, but worth the peace of mind of upgrading.
Old Jul 22, 2006 | 03:25 PM
  #4  
MiataNuTca's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2004
Posts: 191
Total Cats: -2
From: Windsor, Canada
Default

Anyone live in the Detroit Mich, area? I need a shipping address. Apparently, you can't ship 200lbs of used parts to Canada.
Old Jul 22, 2006 | 06:15 PM
  #5  
Braineack's Avatar
Boost Czar
iTrader: (62)
 
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Default

My Aunt works for GM, I think about an hour out of Detriot. I could ask her.....
Old Jul 23, 2006 | 01:20 AM
  #6  
JDMAflac's Avatar
Junior Member
iTrader: (1)
 
Joined: Oct 2005
Posts: 466
Total Cats: 0
From: Charlotte, NC
Default

^

You sir are absolutely always trying to help others! ::thumbsup::
Old Jul 23, 2006 | 02:48 AM
  #7  
iWeasel410's Avatar
Junior Member
 
Joined: Jun 2005
Posts: 354
Total Cats: 0
From: Huntington Beach, CA
Default

I have a complete RX7 rear diff conversion available for sale, but it'll ship from Hawaii...so if you're interested shoot me a pm.
Old Jul 23, 2006 | 04:19 PM
  #8  
MiataNuTca's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2004
Posts: 191
Total Cats: -2
From: Windsor, Canada
Default

Well, I bought a 99 LSD, so I'm still running 4.3....I think 4.1 would of been the best, but beggers can't be choosers. I'm gonna contact UPS tomorrow and see if they can supply me with a shipping address I can pick the package up at.....if that doesn't work out, I may need Braineack to contact his Aunt.
Old Jul 23, 2006 | 08:36 PM
  #9  
Joe Perez's Avatar
Boost Pope
iTrader: (8)
 
Joined: Sep 2005
Posts: 34,402
Total Cats: 7,523
From: Chicago. (The less-murder part.)
Default

Originally Posted by MiataNuTca
I'm gonna contact UPS tomorrow and see if they can supply me with a shipping address I can pick the package up at.....
I don't know about UPS, but FedEx will allow a person to ship a package to be held at a FedEx office (or a Kinko's store, in the US), with the understanding that the recipient will come to the office and pick up the package. I use this this all the time for shipping packages to myself for trade shows, so that the package is there before I get into town and I can just cruise by FedEx and pick it up on my way to the convention center.

You should give UPS a call and see if they do this as well. It's very probable that you could have the package shipped to be held at a "UPS Store" (formerly known as Mail Boxes Etc.) near the border. If not, FedEx Ground rates are usually not much higher than UPS, particularly since it will be a commercial shipment, rather than a residential delivery.
Old Jul 24, 2006 | 02:45 PM
  #10  
Arkmage's Avatar
Elite Member
iTrader: (3)
 
Joined: May 2006
Posts: 2,895
Total Cats: 0
From: Houston, TX
Default

Or if you don't mind the additional drive to get it I live in Flint (48504). PM me if you are interested and I'll send you the addy.
Old Jul 24, 2006 | 02:56 PM
  #11  
Braineack's Avatar
Boost Czar
iTrader: (62)
 
Joined: May 2005
Posts: 80,552
Total Cats: 4,368
From: Chantilly, VA
Default

Originally Posted by JDMAflac
^

You sir are absolutely always trying to help others! ::thumbsup::

I'm just hoping someone pays it forward to me. I did just buy a lotto ticket this afternoon
Old Jul 25, 2006 | 11:18 PM
  #12  
MiataNuTca's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2004
Posts: 191
Total Cats: -2
From: Windsor, Canada
Default

Well, I got everything I need shipping to me at the UPS hub in Detroit. Package should make it by Thurs. I ended up getting a 99 Torsen LSD with all the trimmings to just bolt it in. Diff only had 45,000miles on it. The final gear ratio is still 4.3, I kinda wish it was from an auto 4.1, but beggers can't be choosers.
Old Jul 31, 2006 | 07:49 PM
  #13  
MiataNuTca's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2004
Posts: 191
Total Cats: -2
From: Windsor, Canada
Default

Finally done!!! Total time: 14hours....includes running back and forth to the local auto parts store. The hardest part of the install was getting the *#$%!&*! axle nuts off. It took 4 feet of pry bar, and I had to heat the bolts with a torch....I also used "Pops" method of melting candle wax into the seams of the bolt while it was red hot. I didn't have any trouble getting the PPF bolts off like others have, but the axle nuts gave me my share of headaches. Anyway, my initial impressions of the Torsen are positive. I no longer feel a "nudge" in the drivetrain when I accelerate into boost around a tight corner. The Viscous used to nudge a bit when it enabled, which gave you a uneasy feeling like the rear kicking out on me when on the edge. That no longer happens. I haven't really done any clutch drops, because I do feel there should be a little break in time (let the locktight dry). I'm still a 4.3 gear so no worries about speedometer error, and the Turbo keeps in it's power curve. Couldn't be happier.

P.s.- I got the diff and all the parts (except C clips- which you want new one s anyway) from Planet Miata. Very happy with them. (850$ for everything).
_________________
Old Aug 2, 2006 | 12:22 PM
  #14  
Hi Im Simon's Avatar
Junior Member
iTrader: (18)
 
Joined: Aug 2006
Posts: 303
Total Cats: 0
From: Temple City, Ca
Default

awesome

simon
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Girz0r
Gaming
23
Jan 18, 2017 12:02 PM
Patriarca
Meet and Greet
17
Oct 13, 2015 01:34 PM
zephyrusaurai
Meet and Greet
2
Sep 28, 2015 10:59 PM
hi_im_sean
Miata parts for sale/trade
1
Sep 16, 2015 12:45 PM
Motorsport-Electronics
ECUs and Tuning
0
Sep 5, 2015 08:02 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:55 AM.