you're only leaving a little on the table with the cast manifold, while tim's manifolds are pretty much ideal, in your situation, you're probably best to snag a cast manifold and DP and just make it happen.
If you wanna pinch pennies, source a good SR20 T25 turbo, will perform like a GT2554. '99 with one: http://www.boostedmiata.com/gallery2...serialNumber=2 |
Yes, just need to get things going on my budget build- I havn't even had a ride in a non-normally aspirated Miata yet !!! (I have in a Viper ACR so i'm ok for now)
I really just need to get some boost! This week we got a foot of snow and had mornings of -27C so even stock I am having wheel spin and it makes me not want to add any power or work on a car. I still keep watching the parts for sale forum so we'll see. |
If I had to do it all over again, I'd go Absurdflow and v-bands everywhere. But I'm kind of serious about it. I track my car, I've broken studs before, etc.
For a street car and stock block, i would not bother myself. |
Originally Posted by Spookyfish
(Post 493060)
If I had to do it all over again, I'd go Absurdflow and v-bands everywhere. But I'm kind of serious about it. I track my car, I've broken studs before, etc.
For a street car and stock block, i would not bother myself. |
How do people feel about the FM manifold and cast DP outlet ? I found a set of those for under $400 - worth it?
|
it works.
|
Originally Posted by Braineack
(Post 493105)
it works.
I just want more flow. |
That doesn't "boost" my confidence....
As in it'll get by or wowee thats great and soooo worth it |
For that price, its worth it
|
don't get me wrong its a solid unit, it's just not designed to be the most efficient setup out there, nevertheless, it's not close to the worst either.
|
Originally Posted by Landrew
(Post 493029)
Sounds like the Absurdflow + 3" all the way back can turn the 54 into a 60 for spool.
I am the guy that is awaiting Tim's next absurdflow Vband setup and I can hardly wait to dry hump that thing. I also bought one of Abe's(Artech) 1.6L manifolds and donwpipes for MiniMe(my previous DD street/track car) as I decided to turbo it again after the engine is rebuilt. That said, I would not hesitate to get a log style manifold for street use. I would only go V band and tubular on a car that sees track use, or if I had too much munny;) |
I did have that backwards - thanks
Munny is the key.... |
You're wasting your money. Just get a log, floor the fucker and wait the .1 second longer for your shit to spool. There's no point to a tubular without megapower.
|
I hear you.
|
I think $400 is a good price for a manifold and the hardest part of the downpipe to make. There's no used absurdflow stuff because I haven't build many. it's just me in my garage in my spare time. I only sell stuff cheap when I build it w/o a buyer in mind then need the cash quick. I have a twin turbo setup for $1800 shipped in the classifieds ;) It's not what you want in terms of quick spool unfortunately.
|
Your stuff sounds so good that I doubt it would be resold unless someone went to a V8
|
Originally Posted by Landrew
(Post 493029)
3" piping all the way back as well. I wasnt sure if you did that too.
Shore Motorsports: Fabrication & Installation And here is one he built for Paul: Part 1: http://www.shoremotorsports.com/pics...aulBEGIdp5.JPG Part 2: http://www.shoremotorsports.com/pics...aulBEGIdp7.JPG |
very nice - thats an option to consider as well - thanks
|
The tubular manifolds are fine. They work great, and help to provide lower end spool. But, they are not as reliable as the cast manifold.
The SSM is the BEGI-S kit with "S"tainless "M"anifold. Basically, a BEGI-S turbo kit with the S4 Manifold and downpipe. Parts from the cast manifold and stainless manifold are not interchangeable. If you are not tracking the car, do not worry about the studs stretching. Stephanie |
Originally Posted by Landrew
(Post 493040)
(I have in a Viper ACR so i'm ok for now)
|
All times are GMT -4. The time now is 07:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands