ILOVETACOTACO Turbo Kit
Hi I wanted to know if anyone has tried ILOVETACOTACO turbo kit on Ebay and what you think of it and is it a waist of money or not?
|
No one has ever heard of it.
|
Last time i heard someone using it they made almost 400 hp. It blew the begi S4 kit out of the water.
|
That's what iv heard to but iv seen a pretty even amount of people that love it and hate it iv herd good and bad I know the pictures on ebay show it dosent hit the block but theres a couple threads on here that say they do and I dont want to spend the money on a full kit then have to go back and get a new manifold.
|
Those threads on here are BS. I've personally used it. It DOES NOT HIT BLOCK. Best bang for buck ever. Would easily bolt on again...
|
I thought it already confirmed in the ad that it does not hit block.
|
Ok thank you. But I do have a couple questions for you are how much hp did you gain and how much PSI was it and why so cheap?
|
It's cheap cause it's not genuine garrett...but it's just as good. The actuator is set at 7psi. I dyno'd it at Gluteus Motorsports, and it made well over 200.
|
I definately didn't waist my time with that kit. That was also at a time in my life where I drank a lot. I was waisted all the time!! Shitfaced bro!
|
Ok can I puss 10 with it or do you think it would blow the motor its stock with 153k on it?
|
What year is the car?
|
I made 350 on 3 psi that kit is legit bro, I herd it haulz like cray ull pull on ngaz and look gud doin it
|
its a 97 with 153k on it but it still runs strong im even getting ready to drive it from Washington to Texas.
|
10 psi should definitely make the trip much quicker.
|
^ 3psi and you made that? Must've been a gynojet. My dyno shows low. Btw OP...he means 13, not 3...lol. You can run up to 16 psi with that setup on your motor.
|
yeah bro 3psi not a typo on 13 you should make well over 400
just make sure to turn the cas completely clockwise and run all the timing |
I'd drive from Washington to Honduras on that boostz
|
what kind of hp would that put me at with 16psi and a full exhaust?
|
500whp+
Basically pullin on lamboz |
ull need a full roll cage and prolly a parachute wif dat kinda powa bro
be careful with it |
Does Chuck Norris have you on speed dial?!? You'd wipe your ass with c6 ZO's all day! Shit would make like 530whp with a slight 28* timing advance.
|
Gotta tune the noss another mili second and you'll run 9s.
|
Naw its a street car just a hard dog roll bar
|
better throw some carbon kevlar brakes on dat dere bad boy den cuz u wont be able to stop after 180mph pullz
|
What do you plan on doing for fuel? Power card and a 5th injector or what?
|
Originally Posted by triple88a
(Post 1093228)
What do you plan on doing for fuel? Power card and a 5th injector or what?
|
fuel pressure regulator bro
you know this bump base pressure to 180psi and keep the stock injectors, they're good for around 550-560 depending on how clean they are |
Oh shit son, I forgot about fuel pressure. Good call!!
|
What would you suggest?
|
Originally Posted by NA4Life
(Post 1093232)
What would you suggest?
|
Could it work with just a adjustable fuel pressure regulator rather then spending $800 on a standalone fuel management system?
|
Just why.
Ebay= crap kits & blown motors. Manifold will crack. Go to Flyin Miata or Begi for a decent bolt-up kit. 250hp is the max your internals can take, but you will need to spend $$ on a clutch, and EMS of some sort. I think the lowest $$ you can spend and have something decent is $3k. Everyone knows this but OP, your lazy and didn't do ANY reading. |
2 Attachment(s)
Originally Posted by NA4Life
(Post 1093197)
Hi I wanted to know if anyone has tried ILOVETACOTACO turbo kit on Ebay and what you think of it and is it a waist of money or not?
Here's a waist of money: https://www.miataturbo.net/attachmen...ine=1390068915 |
I love tacos.
If you don't love tacos you must be some type of communist. |
I would buy nething wit taco in its name. Yo seriously I ran this manif0ld before i hit up artech for my new setup and honestly I think i made more boost wit the taco. Shit gave me the squirts when i got in boost it was mad crazy
|
2 Attachment(s)
Originally Posted by 18psi
(Post 1093218)
yeah bro 3psi not a typo on 13 you should make well over 400
just make sure to turn the cas completely clockwise and run all the timing https://www.miataturbo.net/attachmen...1&d=1390071500 |
But that manifold is made cheap and has a high risk of cracking its only stainless steel can it take the heat and not crack?
|
yes. but worst case just carry a gallon of water with you and throw it on the manifold after a hard pull to cool it off real quick dawg
|
Please make it stop.
|
I know that one of the fastest stock motor miata on mt.net has a ebay turbo. So yes people hate on ebay parts because many parts suck. Used turbo kits for sale here are always a better buy. But try it out and be smart about the tune and you might have a fun 200whp miata with not much coin. This site is full of good info once you read a bunch..
|
Nah this manifold is made by older chinese kids. Thats why its still cheap but very high quality. Even some of the begi and FM manifolds hit the block once in a while while the TACOTACO kit never does.
|
Look up member by name. Dcvn. He did a lot of custom work on ebay kit but he got some real good results. Nothing on ebay is bolt up and good to go. If you cant fabricate or weld I would just get a used kit. I got some turbo parts for sale all name brand if your interested. Good luck.
|
Originally Posted by locomonkeyboricua
(Post 1093318)
I know that one of the fastest stock motor miata on mt.net has a ebay turbo. So yes people hate on ebay parts because many parts suck. Used turbo kits for sale here are always a better buy. But try it out and be smart about the tune and you might have a fun 200whp miata with not much coin. This site is full of good info once you read a bunch..
Originally Posted by locomonkeyboricua
(Post 1093321)
Look up member by name. Dcvn. He did a lot of custom work on ebay kit but he got some real good results. Nothing on ebay is bolt up and good to go. If you cant fabricate or weld I would just get a used kit. I got some turbo parts for sale all name brand if your interested. Good luck.
But you redeemed yourself in post 42. |
Lol . Man you drank that hateraid today 18. I remeber a long time ago when you where just starting with turbo miatas . You wanted to meet my friend sleepermx5 in sac. You know the guy with 300whp 1.6 miata. Lets just say when I met him his miata was stock. So I never get mediocre parts. I been in the turbo miata game for a long time. But some people just like to talk junk for no reason. If hks garrett and artech is mediocre then yes thats me.
|
Originally Posted by Fireindc
(Post 1093234)
standalone fuel management and a motec systems exhaust
|
not to be an A hole but... I do not understand this at all. There is a sticky in this section giving you plenty of reasons to pass on this kit. two threads down from this thread there is one warning you about buying an ebay turbo kit. so you directly quote that thread in the title of this new pointless thread asking if you should get one. :dunno:
|
Because there's so many different answers but no one used it but that one guy they think cuz it's from eBay the hole kit is shit but from what iv found it's just the manifold
|
Originally Posted by NA4Life
(Post 1093420)
Because there's so many different answers but no one used it but that one guy they think cuz it's from eBay the hole kit is shit but from what iv found it's just the manifold
Sprocket |
Fast Cheap Reliable pick 2<----pick 2
Read read some more and then some more...the search button is your best friend :) Check out the Begi shanghai starter kit(churbo but it seems to be somewhat reliable and comes with a decent cast manifold that is proven to work well) eBay IC (prepare for some fab work and fitment issues) Don't cheap out on engine management! Megasquirt is cheap and there is a ton of support for it on this forum. Start learning how to tune before the turbo install otherwise you can run into serious issues and possible destroy your motor. Read the DIY FAQ!!! This was incredibly helpful to me and I still refer to it while I continue to sort out my build plan. |
Originally Posted by BoVice
(Post 1093449)
Fast Cheap Reliable pick 2<----pick 2
Read read some more and then some more...the search button is your best friend :) Check out the Begi shanghai starter kit(churbo but it seems to be somewhat reliable and comes with a decent cast manifold that is proven to work well) eBay IC (prepare for some fab work and fitment issues) Don't cheap out on engine management! Megasquirt is cheap and there is a ton of support for it on this forum. Start learning how to tune before the turbo install otherwise you can run into serious issues and possible destroy your motor. Read the DIY FAQ!!! This was incredibly helpful to me and I still refer to it while I continue to sort out my build plan. |
Everything I mentioned in my post was found on this site from searching, the reason these guys are messing with you is that they've dealt with this question numerous times and are tired of having to repeat themselves over and over. I'm not trying to put you down or anything like that but have you searche? Read the DIY Faq? Read threads of note in beginners luck? These will answer 95% of any questions you may have. It takes a long time but it's worth it. These guys who are screwing with you have contributed soo much USEFUL info to this forum with write ups and build threads that makes it easier for people like you and I to build a system that will function properly on a budget. They've went through the hard part of trail and error to make life easier for the rest of us, when a question that has been asked a million times is asked again they will have some fun.
Good luck with whatever route you choose to go, just take the time to research and it will save you time and money in the end. |
the ilovetacotaco kit is crap, plain and simple. https://www.miataturbo.net/prefabbed...bay-kit-76846/
|
I would be interested in links to the most terrible, eBay-tastic, ghetto rig builds.
What's the worst you've seen? I think it will be okay if this thread veers off topic a bit. Maybe it will help. |
Originally Posted by NA4Life
(Post 1093452)
...everyone else just thinks im stupid...
|
Originally Posted by NA4Life
(Post 1093452)
Thank you your the first one to really help me everyone else just thinks im stupid and don't want to help and I know nothing about tubros iv never done anything with them.
|
The hated and the haters who hate them.
|
We might need a video introduction to Miataturbo.net since soooooooo many newbs do not seem to be able to read the basics. Puppets would be a bonus!
|
Originally Posted by relte
(Post 1094084)
...
Ponies would be a bonus! |
MT.net introduction video
great idea:laugh: |
|
All times are GMT -4. The time now is 08:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands