Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Prefabbed Turbo Kits (https://www.miataturbo.net/prefabbed-turbo-kits-3/)
-   -   Installed Greddy Turbo Kit and.... (https://www.miataturbo.net/prefabbed-turbo-kits-3/installed-greddy-turbo-kit-10340/)

cjernigan 06-10-2007 10:47 PM

See the line going to the metal elbow pre-turbo? That is for the crankcase breather. You want one just like it, but after the AFM.
https://www.miataturbo.net/forums/at...9&d=1178248417

Slidin'Miata916 06-11-2007 06:17 PM

I found two spots that i can route that hose to from the valve cover. which would be best.
1. My air filter adapter has holes around it plugged with rubber caps
2. Tee off from my throttle body. I know you guys said pre turbo, but im just gonna throw it out there
Which do you guys perfer?

magnamx-5 06-11-2007 06:19 PM

air filter do NOT put it on the TB

BrillntBlk92 06-11-2007 07:12 PM


Originally Posted by cjernigan (Post 121929)
See the line going to the metal elbow pre-turbo? That is for the crankcase breather. You want one just like it, but after the AFM.
https://www.miataturbo.net/forums/at...9&d=1178248417

the way you run your hose to the crankcase is between the turbo and the afm right? are you saying its better to go between the afm and the air filter? soryr, the last sentence is kinda confusing.

magnamx-5 06-11-2007 07:55 PM

no any pre compressor portion will do.

Slidin'Miata916 06-11-2007 08:23 PM

just got done hookin it up. Hopefully i dont leak anymore EEk

Slidin'Miata916 06-11-2007 09:46 PM

Well, I just found that my bov hose (that connects to the bottom of the bov) has a tear so ill be blocking that off.....And Im smoking white smoke, any idea on what that could be? Isnt white smoke coolant burning?

magnamx-5 06-12-2007 08:00 AM

not always can be clean oil as well. i blew white smoke when i blew #2 piston apart at the ring lands.

Slidin'Miata916 06-12-2007 10:23 AM

I just did a compression test, and in cylnder one it was ~100, two it was ~150, three it was ~140, four it was ~150. Is that pretty normal? I know that their suppose to all be about the same, but one is kinda low.

Slidin'Miata916 06-13-2007 03:03 AM

I mean, with these numbers is it safe to stil run the turbo?

Braineack 06-13-2007 08:51 AM

I suggest doing the test again. #1 at 100 says something (my guess, rings) is allowing compression to pass through.
  • engine should be warm.
  • disconnect the coils and injectors.
  • gas pedal on the floor while turning ignition.
  • keep cranking till the gauge stops increasing.
  • test three times each cylinder.
  • then pour (1) tsp of oil onto the pistion, and test (3) times again.
  • write down all the numbers.
  • come back here with results.

from the smoking problems you had prior, it sounds like you did something to F-something up. Was 91-93 octane in the car when you first boosted? was the ignition timing retarded?

magnamx-5 06-13-2007 09:55 AM

do what braineack says or risk even more damage. hopefuly it is a procedure problem.

Slidin'Miata916 06-13-2007 10:27 AM

Are you suggesting bad rings? Because I retested it about three times : /

Slidin'Miata916 06-13-2007 12:16 PM


Originally Posted by Braineack (Post 122530)
I suggest doing the test again. #1 at 100 says something (my guess, rings) is allowing compression to pass through.
  • engine should be warm.
  • disconnect the coils and injectors.
  • gas pedal on the floor while turning ignition.
  • keep cranking till the gauge stops increasing.
  • test three times each cylinder.
  • then pour (1) tsp of oil onto the pistion, and test (3) times again.
  • write down all the numbers.
  • come back here with results.

from the smoking problems you had prior, it sounds like you did something to F-something up. Was 91-93 octane in the car when you first boosted? was the ignition timing retarded?

Im sorry, I didnt see all that on the bottom brain. Thanks for this. Ill test again today, and i had 91 octane and timing was at six degrees

Slidin'Miata916 06-13-2007 07:03 PM

Fuck this. Im gonna sell the turbo kit and my exhaust and save up for another bike. I dont feel like blowing a motor. Thanks Guys for the help.

Slidin'Miata916 06-16-2007 11:24 AM

Ok...So I was on my way to work and I hit this straightaway thats always dead...no houses, no cars, no people, and its been some time since ive got on it...So i take off in first like normal then gun it, burning tires through first, then second then i let off for my turn. I smelt burning oil and was kinda nervous, im at the stop light by my work and my car was crazy SMOKING!!!! So I immideatly park it and pop the hood and oil EVERYWHERE. I walked to work and called my friend to drive my car home for me. I get home right now and start it with the hood popped. I had it idling for some time, then i went to the throttle cable and was reving for some time, theres oil everywhere, but i cant seem to find where its leaking now.... Any clues as to where it could be comming from. Im about to throw my car off a cliff AHH
Edit. There is no way the return line not being perfectly down hill can splatter this much oil right!

Braineack 06-16-2007 11:43 AM

when you have bad rings, you are losing compression through them, compression = pressure....this loss of pressure into the crankcase has to go somewhere, so it forces oil out wherever it can; breather line, dipstick, spark plugs, valve cover gasket, oil retun line, etc.

so all that crazy smoking everywhere is that spilled oil all over your manifold/turbo/dp and burning off....chances are your exhaust is also dumping lots of blue smoke as well.

we already advised you that your compression numbers suggested such problems...I don't see why you'd want to go out and abuse something thats already on it's last leg.

Slidin'Miata916 06-16-2007 11:47 AM

Do you think I would have the same oil problems if I were to go back Naturally Aspirated

Slidin'Miata916 06-16-2007 11:50 AM

I still dont see how any of this is happening on Four Pounds....

Slidin'Miata916 06-16-2007 09:40 PM


Originally Posted by Slidin'Miata916 (Post 123433)
Do you think I would have the same oil problems if I were to go back Naturally Aspirated

???


All times are GMT -4. The time now is 12:10 PM.


© 2024 MH Sub I, LLC dba Internet Brands