Can anyone tell me how to hook up the wiring for the boost retard box. I got it used and have now wiring schematics. I searched but couldn't find anything.

 

I wonder if its the same wiring as a bipes....Hm.....

 

MSD's tech support number is 915-855-7123.

FM's tech support number is 970 242 3800 (they used to use the MSD, probably still have the old docs)

 

FM still sells the MSD box http://www.flyinmiata.com/index.php?...umber=07-97000

 

nobody knows how to wire this or where there are wiring directions?

 

Which part ofwas unclear?

 

Why does everyone have to be a smartass? It was 5:00 on saturday night when I was putting it in and I was busy during business hours. Thanks for all the help.

 

Cause we are smart asses bubba. Havent you noticed that yet we don't enjoy doing someone elses leg work

 

Sorry for asking for help, I thought that was the point of a forum.

 

We just get a little irritated when someone shows up and starts demanding info when it's obvious they haven't used the search function or even Google to try to help themself, and then cops an attitude when given an answer that, while completely accurate and potentially even helpful, requires a small modicum of work on their part.

But since I'm about to leave for an AutoX and I need some good Karma right now...

Assuming your MSD box has four wires (red, black, white, yellow) then the wiring is:

Red = +12 when key is on

Black = GND

White = CKP in from CAS

Yellow = CKP out to ECU

I didn't have this data squirreled away in some secret members-only archive, I just used Google. Took about three minutes.

Assuming a 1.6 car (you didn't specify) then the CKP wire is a white wire at position 2E on the ECU.

Have we serviced your needs adequately?

 

thank you! I was stressed out cause I was installing all my turbo **** and that was the one piece of info I needed.