Oil lines - problem solved! - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members

Prefabbed Turbo Kits A place to discuss prefabricated turbo kits on the market
Sponsored by:
Sponsored by:

LinkBack Thread Tools
Old 01-09-2007, 05:18 PM   #1
Thread Starter
Join Date: Jun 2006
Location: Manchester, UK
Posts: 25
Total Cats: 0
Default Oil lines - problem solved!


I'd been struggling to replace the sheared off oil feed adapter on my Greddy, it just seemed nigh on impossible to find the part in the UK.

Thanks to Demon Tweeks (www.demontweeks.co.uk) I've finally solved it - I thought I'd post the bits I bought on here as reference for others in the UK struggling to find oil feed bits.

I junked the entire Greddy oil feed and bought the following, following the "flow" of oil from the engine to the turbo:

M10x1.5 -> 3/8unf adapter - (Engine block end)
3/8unf -> -3AN elbow (adapter to oil line)
1m -3AN hose
-3AN -> 3/8unf elbow
3/8unf -> M10x1.25 adapter (turbo end)

I had to get the elbows and a new line since the stock line has a convex flare; all of the adapters Goodridge stock have a convex flare on the adapter rather than the concave flare required for the Greddy line.

Should get it all fitted this week, considering the kit has been gathering dust since November I cant wait!

Hope somebody finds this of use someday, PM me and I'll give you the part numbers.


ps - No thanks to Greddy! 1000 spent on a kit and they "dont have the 1 adapters in stock"
ds23pallas is offline   Reply With Quote
Old 01-10-2007, 10:09 AM   #2
Join Date: Mar 2006
Location: The Netherlands
Posts: 21
Total Cats: 0

I know this problem . My GReddy kit was delivered without that engine oil adapter and i could not get it over here in the Netherlands. I looked around in the rest of Europe, bt no such luck. So i finally had to order in the USA. But i keep your solution in mind the next time i need oil supply parts.
andrepascal is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
Project Gemini - Turbo Civic on the Cheap Full_Tilt_Boogie Build Threads 59 12-15-2017 09:00 PM
OTS Bilstein to motorsports ASN conversion stoves Suspension, Brakes, Drivetrain 5 04-21-2016 04:00 PM
Moroso Air Oil Separator Catch Can Aroundcorner Miata parts for sale/trade 2 10-01-2015 04:20 PM
Leaky Wilwoods mx592 Suspension, Brakes, Drivetrain 1 10-01-2015 01:45 AM
Low oil pressure after 1.8 swap and new turbo setup JesseTheNoob DIY Turbo Discussion 15 09-30-2015 03:44 PM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 06:51 PM.