Originally Posted by Braineack
(Post 988270)
I went to the gym on Friday for the first time since Aug. I did deadlifts, overhead presses, and pull-ups. My whole body is still sore, the weight was significantly less than I used to, and I feel feeble and impotent.
|
should I buy an old mustang and feel good about myself when it overheats and I solve the issue by posing with my shirt off in front of a gas station?
|
1.6 owners can probably fit their wieners in that pipe.
:dealwithit: |
Originally Posted by hustler
(Post 988312)
1.6 owners can probably fit their wieners in that pipe.
:dealwithit: |
Originally Posted by hustler
(Post 988312)
1.6 owners can probably fit their wieners in that pipe.
:dealwithit: like throwing a sausage down a hallway
Originally Posted by albumleaf
(Post 988485)
I will post a pic later tonight just you wait
of your weiner? make sure to have it set on macro and 4x zoom oh and have plenty of lighting |
Originally Posted by 18psi
(Post 988486)
too big
like throwing a sausage down a hallway of your weiner? make sure to have it set on macro and 4x zoom oh and have plenty of lighting |
:laugh:
|
MiataTurbo coolant line FAQ thread.
|
the way i bent mine was a make shift mandrel. Plug one end with a battery and tape then filled it with wet sand, plugged other side with battery and tape then stepped on it to get the needed bend without kinks.
the time you took posting this you could have just unbolted your manifold and bent it. try sticking the pipe in your but hole then bending, worked for a few members here. |
Mapp gas, than make the red thing a curly-q
|
I used the extensive technique of being a man.
Its very tricky, but with enough practice and testosterone, you can pull it off. |
Originally Posted by albumleaf
(Post 988241)
D:
Weird, seems like the bracket is hung up on the manifold when I try and pull on it. The pipe itself can't move horizontally seeing as it's constrained by the bracket and it can't move much in and out given that it's still stuck in the mixing manifold. I am seriously mechanically retarded, so thanks for putting up with this. |
Originally Posted by 18psi
(Post 989008)
I used the extensive technique of being a man.
Its very tricky, but with enough practice and testosterone, you can pull it off. |
Originally Posted by 18psi
(Post 989008)
I used the extensive technique of being a man.
Its very tricky, but with enough practice and testosterone, you can pull it off. |
I decided to quit being a bitch and took the manifold off. My current plan is using my micropenis as leverage on the pipe, will post back with results.
|
winning
|
Originally Posted by albumleaf
(Post 989164)
I decided to quit being a bitch and took the manifold off. My current plan is using my micropenis as leverage on the pipe, will post back with results.
|
All times are GMT -4. The time now is 08:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands