Turbo to Manifold Gasket?
Don't want to sound retarted but I need to replace the gasket inbetween my turbo and manifold. The bolts must have backed out some and just from the slight play other than hp loss I think it ate it's way threw the gasket. What size gasket do I need? (stock greddy kit & turbo)

Turbo to Manifold Bolts?
Also was just going to tighten down the bolts again to see if it would stop the leak which it did alot but not all the way one of the bolt must have some serious corrosion from the threads going all the way threw to the runners and the heat, gas, etc basicly welded the threads of the bolt to the manifold. So when I went to tighten it down that one bolt just snapped. So gotta take it apart and get the rest out, etc. Just wanted to know if anyone happened to know the specs on the bolts instead of me having to take one out drive another car to the local nut a bolt place. If not no biggie but if so I'd like the size, thread pitch, and length.

 

https://www.miataturbo.net/forums/showthread.php?t=614

 

The replacement gasket is from a Nissan 300zx, part number 14415-17M00.

They run ~$20 from the dealer.