4 Attachment(s)
So im tossing around the idea of an NC, so started looking at BOOST options besides this shenanigans here. Started looking and found Begi's kit for like 3600...hmmm, not bad. Then I saw tuning options, which added like 1K, so I wanted to see if those are the only options, seems high but im used to these GM PCMs that can just be reflashed cheaply...whatever, cant find much, so I just got the m.net and search Begi.
Find a thread about Moto-east modifying the Begi kit. This interests me. Begin to read and I realize how much of a clown this blackbone guy is. Mike @ moto-east posts his a pic 3 yr old begi manifold (im assuming to show that its still in good shape), and talks about some of the upgrades he wants to make, mainly about PS routing and charge pipe routing. https://www.miataturbo.net/attachmen...ine=1383277227 Then clearly states he has another new one for a customer. https://www.miataturbo.net/attachmen...ine=1383277227 The this guy steps in
Originally Posted by Blackone
Beautifull manifold Korky, nice job!
Then a whole 11 mins later...
Originally Posted by Blackone
Mike it looks lile yours craked in the exact same place than mine did at the base of #3 runner?
Then Mike says Not sure what crack you're seeing? There's no cracks...maybe you guys are referring to the relief cuts? Those are Corky's staple and work to allow the flange to expand without warping. Mine was never relief cut and there's no cracking, warping, nor leakage.
Originally Posted by Blackone
mmm, no not talking about the flange, why are you changing a perfectly working manifold?
and is it mild steal? Thanks missed that, I really like those shiny coatings, very nice Thread for you guys http://forum.miata.net/vb/showthread...highlight=begi |
Its obvious that Blackbone is a serious piece of shit. The evidence just piles up.
Its fucked up that someone would try to run a business with this kind of shady bullshit going on. |
It doesn't look good for someone who already has a questionable rep to troll other vendors. It makes it hard to tell if the "Korky" was passive-aggressive, or just not paying attention.
When you have that kinda rep, everything little thing you do gets looked at with a different light. |
A+++ trolling from Jay.
"Oh wow I see a crack in a place that you can't actually see in the picture." I mean you can see where the weld is on the #3 runner, but not much else. There could be a 1/4" gap and I'm pretty sure it couldn't be seen from that pic. Truly a master at work. Too bad he's trying to run a business, he would fit right in here otherwise. |
Originally Posted by sharkythesharkdogg
(Post 1069234)
It doesn't look good for someone who already has a questionable rep to troll other vendors. It makes it hard to tell if the "Korky" was passive-aggressive, or just not paying attention.
When you have that kinda rep, everything little thing you do gets looked at with a different light. |
Maybe I'm the idiot. I thought he spells his name Corky. I was referring to how the other guy spelled Corky's name.
|
Correct, but you used quotes so I thought you were actually referring to Corky, not the dude who kept calling him Korky.
|
Nah, I was using them to just highlight the spelling situation. Probably used quote marks incorrectly. Anyway, :party:
|
I had to have my manifold rebuilt by Corky due to cracks as well. As far as the picture where Jay sees the "phantom crack" goes, take a look at where the weld is on runner number 3. You will see a dark line running along the edge of the weld.
I'm assuming that this was what he was referring to. It looks like the weld is separating from the main and allowing exhaust gas to seep through as evidenced by the carbon on the edge of the weld. |
1 Attachment(s)
|
Good thread.
[Supercharging] The FASTREDRAT is dead. - MX-5 Miata Forum tl;dr -- NC engine asplodes and send the #1 piston through the oil pan, car gets crispy, owner still quite confident that his tune from Jay @ TDR has nothing to do with it. |
I love reading m.net this quite pretty much sums it up
Based on recent dyno of 212 RWHP, the engine was producing about 280 HP, 253 at the crank (30 HP to drive the blower @ 6000 RPM). |
Lol, typical, taking a real useful figure of RWHP, and turning it into some made up arbitrary figure which sounds impressive.
Dann |
Originally Posted by Opti
(Post 1072297)
I love reading m.net this quite pretty much sums it up
|
Originally Posted by nitrodann
(Post 1072305)
Lol, typical, taking a real useful figure of RWHP, and turning it into some made up arbitrary figure which sounds impressive.
Dann |
1 Attachment(s)
|
1 Attachment(s)
Originally Posted by Opti
(Post 1072297)
Originally Posted by Mnet
bunchcha bs....
|
lol @ horsepower. "212 rwhp = 280hp becuz probably 250 at the crank but 30 to spin the blower"
https://encrypted-tbn1.gstatic.com/i...cHISRunJI7dpVz |
Originally Posted by mgeoffriau
(Post 1072269)
Good thread.
[Supercharging] The FASTREDRAT is dead. - MX-5 Miata Forum tl;dr -- NC engine asplodes and send the #1 piston through the oil pan, car gets crispy, owner still quite confident that his tune from Jay @ TDR has nothing to do with it. |
Originally Posted by Braineack
(Post 1072593)
they said that about the Sniper tune when it first came out too, then Cosworth acutally started shipping pistons with the SC kit. Meanwhile Corky was boosted well over 300rwhp without issues on a good tune.
|
All times are GMT -4. The time now is 08:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands