ACT street pressure plate & stock disk - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to   Members

Race Prep Miata race-only chat.
Sponsored by:
Sponsored by:

LinkBack Thread Tools Search this Thread
Old 02-10-2014, 06:28 PM   #1
Thread Starter
Join Date: Sep 2007
Location: Woodworth, La.
Posts: 3
Total Cats: 0
Default ACT street pressure plate & stock disk

Rebuilding my '94 csp autox car for grandson to use as TTD track car. Car will still see a little street use. Going to reuse the Al flywheel (replace wear plate) and get a new ACT street pressure plate. This combination with a stock disk has worked well for 25k miles and a lot of autoxs. I seem to remember not getting the ACT disk because of some folks having some little problem (noise?) with the ACT disk back then. As I will be adding less then 20 hp to what I have been running, I see no reason to not go back to my original set up. Comments? Chuck
chucky is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
Project Gemini - Turbo Civic on the Cheap Full_Tilt_Boogie Build Threads 57 07-19-2017 05:11 PM
OTS Bilstein to motorsports ASN conversion stoves Suspension, Brakes, Drivetrain 5 04-21-2016 04:00 PM
WTB MP62 (Hotside) (NB2) Rick02R WTB 3 01-03-2016 08:18 PM
Going back to stock. Need some 1.6 parts. Trent WTB 2 10-01-2015 01:15 PM
Low oil pressure after 1.8 swap and new turbo setup JesseTheNoob DIY Turbo Discussion 15 09-30-2015 03:44 PM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 03:30 PM.