How are you guys shipping the roller/heat gun? Last time I rented my roller, it was nearly 30 to ship. I offered it on here but a couple cry babies got huffy and puffy over the DEPOSIT.
|
lol @ stock fenders, that's so 2010.
|
1 Attachment(s)
The baseball bat method worked great for me, my paint is thrashed anyways so I didn't bother with a heat gun. There's no limit to how much you can roll/pull the fender out if you are methodical and creative.
Done with a baseball bat, this is a stock NA fender and those are 15x9's with 225/45's on them. There's probably room for the 275 under there: Attachment 189847 |
Originally Posted by chpmnsws6
(Post 712019)
How are you guys shipping the roller/heat gun? Last time I rented my roller, it was nearly 30 to ship. I offered it on here but a couple cry babies got huffy and puffy over the DEPOSIT.
|
Originally Posted by ZX-Tex
(Post 712009)
AACHH!! Don't go renting your scales at the track!
|
Originally Posted by ThePass
(Post 712047)
The baseball bat method worked great for me, my paint is thrashed anyways so I didn't bother with a heat gun. There's no limit to how much you can roll/pull the fender out if you are methodical and creative.
Done with a baseball bat, this is a stock NA fender and those are 15x9's with 225/45's on them. There's probably room for the 275 under there: |
Originally Posted by spoolin2bars
(Post 712057)
you talkin' to me?
No worries, just yanking your chain :) Yeah I am not sure taking scales to the track is a good idea either. Things get damaged, walk off, etc. I suppose I could level the trailer and use ramps... naaahh. I am there to race. Whatever we do has to be pretty low maintenance. |
Originally Posted by chpmnsws6
(Post 712019)
How are you guys shipping the roller/heat gun? Last time I rented my roller, it was nearly 30 to ship. I offered it on here but a couple cry babies got huffy and puffy over the DEPOSIT.
|
Originally Posted by Faeflora
(Post 712083)
Hey snugglebuns I have to roll my fenders for my 225/50/15 MT DR IIs I just got. I will pay for shipping and deposit etc...
Now that I got my pre 2011 Hustler thing out of the way, just send me a PM if your serious and I'll get it sent out. :D |
Did you have to ditch your front fender liners? I will be rolling mine once I get the 15x9 6uls and 225 hankooks mounted.
|
What are fender liners?
Hopefully that answers your question |
Originally Posted by chpmnsws6
(Post 712196)
What are fender liners?
Hopefully that answers your question |
Mine are still in.
|
Originally Posted by ZX-Tex
(Post 712268)
Mine are still in.
|
Depends on your ride height and stiffness of your spring. I'm using a relatively soft setup so I kept rubbing the liners so I pulled them. If you don't rub, leave them in, they can't hurt.
|
For those that left them out, what do you do about the blue wire bundle that normally resides above the fender liner and hangs down with the liner removed? Zip ties? Duct tape?
|
air bag sensor- removed
|
Originally Posted by Shahab
(Post 712282)
Well in that case, once I finish the roll, I will probably put them back. What about where the fender liner mounts to the fender lip? How would it attach post roll?
|
Originally Posted by Shahab
(Post 712357)
For those that left them out, what do you do about the blue wire bundle that normally resides above the fender liner and hangs down with the liner removed? Zip ties? Duct tape?
|
Originally Posted by chpmnsws6
(Post 712376)
air bag sensor- removed
|
All times are GMT -4. The time now is 09:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands