Originally Posted by flier129
(Post 1475247)
Did you have your machine-shop guy do this?
|
Nevermind. Misunderstood at first. Carry on. |
That's not how this works, that's not how any of this works!
The hub OD doesn't locate anything, the center stub does locate the brakes rotor. The wheels are always located by the studs even if you have wheels with the right center bore. If you use tapered lug nuts then they locate the wheel. |
Originally Posted by Bronson M
(Post 1475279)
That's not how this works, that's not how any of this works!
The hub OD doesn't locate anything, the center stub does locate the brakes rotor. The wheels are always located by the studs even if you have wheels with the right center bore. If you use tapered lug nuts then they locate the wheel. However, I’ve found that even with tapered lugs/seats a mismatched hub bore without a centering ring can ride offset ever so slightly and vibrate. Sorry to thread drift. |
Originally Posted by flier129
(Post 1475247)
Did you have your machine-shop guy do this?
|
I got so excited when I read this title.. I figured someone solved the need to have hubs broached for axles. regardless this is a good find! |
Originally Posted by GeneSplicer
(Post 1475371)
I expect you see a yt video soon of grinder against moving hub!
|
|
Thanks Sean. I hope you don't mind by I modified it for myself and figured some other people outside of the US might find this useful too.
Here it is again with metric dimensions for those Imperially challenged: https://cimg6.ibsrv.net/gimg/www.mia...6fde6c28c4.png |
Originally Posted by Madjak
(Post 1475546)
Thanks Sean. I hope you don't mind by I modified it for myself and figured some other people outside of the US might find this useful too.
Here it is again with metric dimensions for those Imperially challenged: https://cimg6.ibsrv.net/gimg/www.mia...6fde6c28c4.png |
Originally Posted by Midtenn
(Post 1437123)
4x114.3 lug pattern maybe?
In for some anyways with the SADFab groupbuy. Thanks OP. |
If you can work with 5 x 100 you could try a Celica GTS front hub They are
Part No: Dorman 930406 https://cimg3.ibsrv.net/gimg/www.mia...6430ff7626.jpg |
That's good to know. I wanted 4x114.3 for a specific set of wheel though. Thanks anyways.
|
Does the SadFab run have an ABS ring? Asking for a friend.
|
The ABS ring is part of the axle, not the hub. So, yes?
|
Ah, yes. My coffee was weak this morning.
|
^^^ :bowrofl:
sorry - couldn't resist! |
Kudos to GeneSplicer for this work! What a great contribution to the community!
|
Originally Posted by phocup
(Post 1475576)
In for some anyways with the SADFab groupbuy.
|
Originally Posted by mr_hyde
(Post 1475968)
Details on this group buy? |
All times are GMT -4. The time now is 08:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands