gtred

Can anyone recommend a shop that is able to properly log a dyno run? So far, the shops that I have come across are only able to log the "basics"; hp/tq and AFR.

Located near Portland, OR. Willing to travel to as far North as Seattle, or South to the Bay area.

18psi

iTrader: (76)

what's wrong with you logging your own runs?

shuiend

iTrader: (24)

Most shop's won't log anything more then AFR, boost, hp/tq. If you want more logged then that you need to do it with whatever ECU you run.

gtred

Is that how it is usually done? I'm a little old school and not particulary up to speed on data logging ecu's.

I'll have to consider coming into the new century and look into a MS, as most of you had recommended... Hell; I might just give up my old flip-phone for a Smart-phone!

18psi

iTrader: (76)

Yeah, that's how its done.

I don't even know of a single shop that will give you an output of anything more than hp/tq and boost/afr

Leafy

iTrader: (1)

If the car is OBDii theoretically they can get anything the OBDii can output. The shop a dyno'ed the subaru at was kind of mad I wanted to be plugged in because it meant they had to calculate RPM. I dont know why they couldnt just put the inductive clamp on the signal wire going to one of the cops.