Should I heat shield my driver's brake line?
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Should I heat shield my driver's brake line?
Should I heat shield my driver's brake line? It's pretty darn close to the turbine and downpipe.
I'm thinking about http://www.summitracing.com/parts/DEI-010472/ DEI Fire sleeve.
I'm thinking about http://www.summitracing.com/parts/DEI-010472/ DEI Fire sleeve.
#5
Fae,
These are two different types of materials intended for different purposes:
1. "Firesleeve" is meant to cover soft lines that carry combustible fluids (fuel, oil, etc.). In the presense of flames, the silicone material chars but does not catch fire. The charring absorbs a great deal of heat from the flames and protects the soft lines. Firesleeve is not, however, a good heat shield. In particular, it doesn't do much for radiated heat (especially in the black color), which is our primary concern around the turbo. I've never seen Firesleeve used on hard lines. Usually, by the time a fire is hot enough to melt or consume hard lines, you've already lost the battle.
2. Heat shielding (the stuff Mike pointed to) is the material to use for cutting down on heat transfer. I'm not sure about its fire resistance, but when it comes to heat transfer, it has a reflective layer for inhibit radiative heat transfer and a little bit of fiberglass insulation to inhibit conductive heat transfer.
I've not seen anyone bother to heat shield the hard brake lines, and Hustler certainly drives hard enough that if it were a problem, he would have seen it. Can't hurt though. Just don't use Firesleeve in that application.
These are two different types of materials intended for different purposes:
1. "Firesleeve" is meant to cover soft lines that carry combustible fluids (fuel, oil, etc.). In the presense of flames, the silicone material chars but does not catch fire. The charring absorbs a great deal of heat from the flames and protects the soft lines. Firesleeve is not, however, a good heat shield. In particular, it doesn't do much for radiated heat (especially in the black color), which is our primary concern around the turbo. I've never seen Firesleeve used on hard lines. Usually, by the time a fire is hot enough to melt or consume hard lines, you've already lost the battle.
2. Heat shielding (the stuff Mike pointed to) is the material to use for cutting down on heat transfer. I'm not sure about its fire resistance, but when it comes to heat transfer, it has a reflective layer for inhibit radiative heat transfer and a little bit of fiberglass insulation to inhibit conductive heat transfer.
I've not seen anyone bother to heat shield the hard brake lines, and Hustler certainly drives hard enough that if it were a problem, he would have seen it. Can't hurt though. Just don't use Firesleeve in that application.
#7
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Fae,
These are two different types of materials intended for different purposes:
1. "Firesleeve" is meant to cover soft lines that carry combustible fluids (fuel, oil, etc.). In the presense of flames, the silicone material chars but does not catch fire. The charring absorbs a great deal of heat from the flames and protects the soft lines. Firesleeve is not, however, a good heat shield. In particular, it doesn't do much for radiated heat (especially in the black color), which is our primary concern around the turbo. I've never seen Firesleeve used on hard lines. Usually, by the time a fire is hot enough to melt or consume hard lines, you've already lost the battle.
2. Heat shielding (the stuff Mike pointed to) is the material to use for cutting down on heat transfer. I'm not sure about its fire resistance, but when it comes to heat transfer, it has a reflective layer for inhibit radiative heat transfer and a little bit of fiberglass insulation to inhibit conductive heat transfer.
I've not seen anyone bother to heat shield the hard brake lines, and Hustler certainly drives hard enough that if it were a problem, he would have seen it. Can't hurt though. Just don't use Firesleeve in that application.
These are two different types of materials intended for different purposes:
1. "Firesleeve" is meant to cover soft lines that carry combustible fluids (fuel, oil, etc.). In the presense of flames, the silicone material chars but does not catch fire. The charring absorbs a great deal of heat from the flames and protects the soft lines. Firesleeve is not, however, a good heat shield. In particular, it doesn't do much for radiated heat (especially in the black color), which is our primary concern around the turbo. I've never seen Firesleeve used on hard lines. Usually, by the time a fire is hot enough to melt or consume hard lines, you've already lost the battle.
2. Heat shielding (the stuff Mike pointed to) is the material to use for cutting down on heat transfer. I'm not sure about its fire resistance, but when it comes to heat transfer, it has a reflective layer for inhibit radiative heat transfer and a little bit of fiberglass insulation to inhibit conductive heat transfer.
I've not seen anyone bother to heat shield the hard brake lines, and Hustler certainly drives hard enough that if it were a problem, he would have seen it. Can't hurt though. Just don't use Firesleeve in that application.
#8
Thank you for the information about firesleeve. Obviously, I did not know that. I have some aluminized reflective shield so I will just use that. If hustler doesn't have a problem I don't think I will. There is indeed an air gap but I was thinking that it still must get pretty hot.
Note that air gaps are great for cutting down on conductive heat transfer. Conductive heat transfer depends upon the heat transfer constant of the media (in this case, air has a very LOW heat transfer constant, it's a good insulator) and the straight line distance from the heat source.
Radiative heat transfer depends upon the transmissivity of the media (in this case, air has very HIGH transmissivity, it offers virtually no protection against the radiation) and cube of the distance (i.e., distance x distance x distance) because radiation must fill a volume. So, we like to cover anything heat sensitive near a radiative heat source (like a glowing turbo) with something reflective. Bet we don't have to go that far because of the cube of the distance property.
Pontification off. Just FYI.
#11
Senior Member
iTrader: (3)
Join Date: Nov 2009
Location: Royal Palm Beach, FL
Posts: 725
Total Cats: 5
http://racepartsolutions.com/proddet...p?prod=HSP-100
i used one of these shields. it is a foil like material( you can crush it and unravel it back to normal) i just crimped it over all my brake stuff and secured with a wire.
i used one of these shields. it is a foil like material( you can crush it and unravel it back to normal) i just crimped it over all my brake stuff and secured with a wire.
Last edited by curly; 09-19-2011 at 08:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post