off the top of my head 550 / 335
|
calculated 560 / 335
|
Anyone want to see datalogs from Hustler @ H2R?
I have the datalogs of 2 session driven by Hustler @ H2R going CW one is on the wet track and one was in the dry. These were logged with MaxQData and a 10hz GPS. I also have a CCW log of a slow guy in a late 80s 911 those Porsche guys are mostly just rolling traffic on this track.
|
Originally Posted by hustler
(Post 526579)
I talked to Johnfag and apparently a guy who sets up SM cars at Hallett is running as much as 3.5* on one side...so apparently camber will help me out. I am at 2.8 front, 2.5 rear, zero toe, 3.5* caster, 700/450 rates, ~12" ride height with 1/4" rake front to rear. +1 on rear bar. The people who say to remove it haven't got the car set up properly (or they are running an FCM Bilstein setup that's designed for use without a rear bar). The car handles better with a rear bar, period. |
Originally Posted by Savington
(Post 527952)
Camber will help you, but stop listening to SM setup guys. They are very good at what they do, but our cars are totally different. More weight, triple the power, way more rear spring/less front spring, better shocks. What works for an SM probably won't work on your car.
I am at 2.8 front, 2.5 rear, zero toe, 3.5* caster, 700/450 rates, ~12" ride height with 1/4" rake front to rear. +1 on rear bar. The people who say to remove it haven't got the car set up properly (or they are running an FCM Bilstein setup that's designed for use without a rear bar). The car handles better with a rear bar, period. |
What would be a good rear spring for a car running a 550lb front, racing beat 1.125 frog sway, and stock rear?
|
I'm running a 300 lb rear spring with the 550s on the front. 7/8" front on stiffest setting, no rear bar. I've only autoxed the setup and liked it, but I'm a suspension n00b peon and have much to learn and experiment.
|
Originally Posted by Eraser-X
(Post 527624)
I have the datalogs of 2 session driven by Hustler @ H2R going CW one is on the wet track and one was in the dry. These were logged with MaxQData and a 10hz GPS. I also have a CCW log of a slow guy in a late 80s 911 those Porsche guys are mostly just rolling traffic on this track.
|
Originally Posted by Savington
(Post 527952)
Camber will help you, but stop listening to SM setup guys. They are very good at what they do, but our cars are totally different. More weight, triple the power, way more rear spring/less front spring, better shocks. What works for an SM probably won't work on your car.
I am at 2.8 front, 2.5 rear, zero toe, 3.5* caster, 700/450 rates, ~12" ride height with 1/4" rake front to rear. +1 on rear bar. The people who say to remove it haven't got the car set up properly (or they are running an FCM Bilstein setup that's designed for use without a rear bar). The car handles better with a rear bar, period. i think he's already going with the consensus. lower + more camber. with his spring rates and veh. weight, i would go with a little less static camber than you have. maybe 2.25frt./2.0 rr, 3.5-4.5 caster, 0 toe, zero rake on height, and try the oem rear bar. if it's tail happy, he can try a bigger split on the shock valving (settings) stiffening the frt. more compared to rear. ultimately he just needs to get it close, and do some work at the track. a tire pyrometer, good air gauge, (what psi he running hot?) and some data aq. will go a long way towards getting his proper settings. |
31psi hot.
Emilio specifically said that I want .25-.5" of rake. I'll get this car moving, its just taking too much work. Once I try suspension, if that goes south, then I'll coinsider something else. |
Originally Posted by hustler
(Post 528119)
31psi hot.
Emilio specifically said that I want .25-.5" of rake. I'll get this car moving, its just taking too much work. Once I try suspension, if that goes south, then I'll coinsider something else. Shaihk also agrees with Emilio on this btw as he told me to run ~.25 of rake with my FCM's. Sav pretty much repeated what I'd said earlier about your car not setting up like an SM, and it's true. I'd argue that Sav's car is a closer match from a setup point of view than an SM is. |
Originally Posted by Tim Broughton
(Post 528022)
What would be a good rear spring for a car running a 550lb front, racing beat 1.125 frog sway, and stock rear?
|
Originally Posted by spoolin2bars
(Post 528084)
your right about that. but, hustlers car is just as different to a spec, as yours is to his. your car's lighter, more spring, diff. shocks, wing, splitter, cage, are you still on torsen?
Originally Posted by spoolin2bars
(Post 528084)
i would go with a little less static camber than you have. maybe 2.25frt./2.0 rr,
Originally Posted by spoolin2bars
(Post 528084)
zero rake on height
|
Just want to say for those of us (me) about to align their Miata for the track, this thread is :bigtu:
|
Originally Posted by Savington
(Post 528145)
~325, then align to taste
|
Can we discuss the rear bar more?
While I don't track much (at all), I found that on my FM springs (318/233) with a 7/8" F sway and stock R bar that the rear would let go unpredictably and the inside rear tire would lift (55% FRC). Once I pulled it I found the handling and traction in the rear to be much more predictable. However, I did notice I lost a lot of turn in and it was hard to toss the car about tight autox courses (58% FRC). But once I fit my 550/300 springs I felt the handling improved dramatically, and felt the turn in improved ten fold even without a rear bar (62% FRC). It was suggested that the spring ratio would just make the car push, but it hasn't been the case. Is this just a factor of the roll stiffness? I can step the rear out with the go fast pedal if inclined. Since I have a pussy multi-purpose street car, I'm going back down to 400/250 rates for comfort. But should I try experimenting with the rear bar reattached? |
Originally Posted by Braineack
(Post 528447)
Since I have a pussy multi-purpose street car, I'm going back down to 400/250 rates for comfort. But should I try experimenting with the rear bar reattached?
|
for camber settings. just buy a pyrometer, THAT determines your camber and many others (including sway bar setting somewhat).
$105 IO Port Racing Supplies: AccuTech™ Economy Pyrometer |
Originally Posted by Tim Broughton
(Post 528252)
Word. Is 300 close enough or would I want to go with a bigger rear bar (14mm+) with that? I'm at 425/300 right now and the rear bias is a little bit of a pain in the ass, but if I could bump up to 550s in the front and handle better while retaining the rest of my current set-up I may jump on that.
Originally Posted by Braineack
(Post 528447)
But once I fit my 550/300 springs I felt the handling improved dramatically, and felt the turn in improved ten fold even without a rear bar (62% FRC). It was suggested that the spring ratio would just make the car push, but it hasn't been the case. Is this just a factor of the roll stiffness? I can step the rear out with the go fast pedal if inclined.
Also, the stiffer your rear springs, the less you will notice the absence of a rear bar but at rates like 550/300 it still makes a significant difference at least for track use. Part of the rear bar discussion will be what you're doing with the car, i.e. track vs. autox. In autox where you're throwing the car into tight corners and want to get the power down immediately, pulling the rear bar can help alleviate inside rear tire spin. But on track where the transitions are generally smoother and you want better mid-corner handling, it's going to push with no rear bar unless you're running some really high spring rates. |
Originally Posted by Savington
(Post 528158)
Same diff, same wheels and tires, same power. Spring rate ratio in the same neighborhood - 9/6 vs 12/7.
that ratio would relate to frt/rr. balance and the use of which sway bar etc. but not the same when it comes to camber specs. atleast in my pyrometer experience. Why? I've run 2.2/2.0 in the past, now I run 2.8/2.5. because with the stiffer springs (esp. the frt.) you won't get as much gain in camber from suspension travel. i'm sure it's fine for your 12/7 rates, but it was too much camber for me when i dropped from 12/8 to 9/6k. like bell william said, a pyrometer will dictate what he needs to run. Why? Nearly everyone runs at least a quarter inch of front rake. |
All times are GMT -4. The time now is 02:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands