Oh, it's worth it in non-flat spotted tires and off-track damage only. The NB2 system is what convinced me to help develop this system. It's terrible in comparison. One of my drivers is Robert Thorne who is a former driver for KPax and Flying Lizard. He loves the system as well and that is from a guy who has been to the top of the mountain so to speak.

Long time reader, love this forum.
bringing this back from the dead. I assume nc hubs are sealed and contain the wheel speed sensor like rx8 hubs.

How does one install an active sensor for this swap in this scenario? I did see several places that sell converters that converts the vr signal to hall and some e36 guys are reporting success, but id rather use the right sensor if at all possible.


[​​​​QUOTE=charliehayes22;1507959]You can use pretty much any active wheel speed sensor. I ended up using a 996 porsche sensor in the rear and a bosch motorsport front from the bin on the NC.

I need to get a set of front and rear uprights from the NA/NB, I would like to get a kit going for the older cars if anyone would be interested.[/QUOTE]

[QUOTE=Mike Daoust;1615715]Long time reader, love this forum.
bringing this back from the dead. How i assume nc hubs are sealed and contain the wheel speed sensor like rx8 hubs.

How does one install an active sensor for this swap in this scenario? I did see several places that sell converters that converts the vr signal to hall and some e36 guys are reporting success, but id rather use the right sensor if at all possible.
/QUOTE]


I would suggest looking up the Mk60 install thread in the suspension and braking forum.

Ive read and re-read that thread and nothing nc specific there. Just one guy mentioned doing this to an nc in this thread, it was a long shot but i was hoping not to have to reinvent the wheel.

So was a kit ever built? I ask as I just bought the parts to install the OEM setup on my Exocet and now after hearing about this and finding this thread I'm wondering about changing directions...

well the harness can be purchased from RHT and the components used to be from 3DM motorsport. I don't know if 3DN is still offering the components. I used to machine the uprights but have not done that in a while.