Trans front cover clutch fork detent broke
#1
Trans front cover clutch fork detent broke
Did anyone experience failure with the front cover cracking where the shift fork mounts ?
I had a squeek and decided to replace the exedy slave with oem and as soon as I took the old slave off, the clutch fork almost fell out. Removed the rubber boot to discover that the ball and part of the casting was broken off the cover plate. Did anyone have this experience ? Any suggestion on whether NB or NA cover is better (NB are aluminum while some NA were steel). Now need to get the trans dropped and not looking forward to doing this on jack stands. Does anyone know if RB header will be an interference ?
I had a squeek and decided to replace the exedy slave with oem and as soon as I took the old slave off, the clutch fork almost fell out. Removed the rubber boot to discover that the ball and part of the casting was broken off the cover plate. Did anyone have this experience ? Any suggestion on whether NB or NA cover is better (NB are aluminum while some NA were steel). Now need to get the trans dropped and not looking forward to doing this on jack stands. Does anyone know if RB header will be an interference ?
Last edited by stevos555; 10-19-2020 at 11:17 PM. Reason: additional info
Thread
Thread Starter
Forum
Replies
Last Post
y8s
Miata parts for sale/trade
0
04-19-2014 08:21 PM
Infamous_GarageNA
Suspension, Brakes, Drivetrain
31
03-22-2012 07:43 PM