Faefae's New Rape Victim

ALLOFIT on BECAUSE RAPECAR will make you sad if not EFR. True Story Bro.
The base kit will be safe for a stock motor. 5-speed will last for a while with some mechanical empathy as well. We're aiming at the 225-240whp range, and we're expecting 10-11psi.
Beyond what you posted (BW EFR6258, tubular manifold), the system will be using a Precision 350hp intercooler, 3" stainless downpipe, heatsleeved oil/water lines, Inconel studs, and everything else required to make the car work. A/C and P/S compatible as well.
Beyond what you posted (BW EFR6258, tubular manifold), the system will be using a Precision 350hp intercooler, 3" stainless downpipe, heatsleeved oil/water lines, Inconel studs, and everything else required to make the car work. A/C and P/S compatible as well.
Last edited by EO2K; May 8, 2012 at 01:00 PM.
Thread Starter
Elite Member
iTrader: (2)
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
Ok i have a stupid nat aspirated totally stock car problem.
Soon after i just start it up the car stumbles between about 2500 and 3500rpm. Feels like a lean stumble. When its warned up it seems fine.
I am thinking coolany sensor mebbe (got the idea from curly in another thread).
Any other ideas?
Soon after i just start it up the car stumbles between about 2500 and 3500rpm. Feels like a lean stumble. When its warned up it seems fine.
I am thinking coolany sensor mebbe (got the idea from curly in another thread).
Any other ideas?








