When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
made a new water pump inlet out of aluminum. Uses factory fasteners, gasket, and lower rad barb. vibrant -6 fitting for turbo water line. a lot cheaper than the hawley cnc version!
anyone know who makes the best automotive wiring "stuff?" crimp connectors, heat shrink, covers for harnesses, etc. Is there a "vibrant performance" of wiring supplies?
for the fuel system, I wanted to convert my '99 to a true return-style setup
-DW300 pump
-6AN line from pump to fuelab inline filter mounted where charcoal canister used to be
-6AN line from filter connects to stock feed hard line
-Feeds to FM fuel rail
-ID1000 injectors
-Return through fuelab mini fpr (manifold referenced)
-6AN return line from fpr to flex fuel sensor mounded in stock fuel filter location
-6AN line from flex fuel sensor to tank
I have about 300 miles on the new engine- running e85 and 10 psi on the gt2560. After that I compression tested each cylinder to make sure the used rings "re-sealed." Compression came out around 170 for each cylinder. So its time to make some real power. Currently in the process of installing the gtx3071: