Miata Turbo Forum - Boost cars, acquire cats.

MEGAsquirt A place to collectively sort out this megasquirt gizmo

What percentage correction is 1 AFR Unit on the VE Table?

Thread Tools
 
Search this Thread
 
Old 04-15-2017, 08:43 AM
  #1  
Senior Member
Thread Starter
 
poormxdad's Avatar
 
Join Date: Dec 2010
Posts: 1,222
Total Cats: 103
Default What percentage correction is 1 AFR Unit on the VE Table?
Gents,

I seem to remember reading somewhere that a 1 AFR Unit change in the VE Table is ~7%. Can someone confirm this, or set me on the right path.

Thanks,
poormxdad is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 04-15-2017, 08:50 AM
  #2  
Retired Mech Design Engr
iTrader: (3)
 
DNMakinson's Avatar
 
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 857
Default
Use ratio. Is 14.2. Want 13.8.

VE new = VE old * 14.2 / 13.8.
DNMakinson is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 04-15-2017, 09:47 AM
  #3  
Senior Member
Thread Starter
 
poormxdad's Avatar
 
Join Date: Dec 2010
Posts: 1,222
Total Cats: 103
Default
Doh... which seems to be about 7% for one full AFR unit. Jeez.
poormxdad is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 04-15-2017, 01:48 PM
  #4  
Boost Czar
iTrader: (62)
 
Braineack's Avatar
 
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,518
Total Cats: 4,080
Default
if you tune using "incorporate AFR" the only thing youd have to do to bump 1 AFR, is increase 1 AFR in your AFR Targets table.
Braineack is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 04-15-2017, 01:50 PM
  #5  
VladiTuned
iTrader: (76)
 
18psi's Avatar
 
Join Date: Apr 2008
Posts: 35,821
Total Cats: 3,481
Default
it's called math
18psi is offline  
Reply
Leave a poscat 0 Leave a negcat
Old 04-15-2017, 02:05 PM
  #6  
Senior Member
iTrader: (2)
 
Lexzar's Avatar
 
Join Date: Nov 2013
Location: Redlands, CA
Posts: 953
Total Cats: 41
Default


Don't get to share my love for calculus enough. kill me.
Lexzar is offline  
Reply
Leave a poscat 0 Leave a negcat
Back to Subforum
MEGAsquirt
View Next Unread
rev MS2 - A/C not working & not in programmable outputs




Advanced Search

All times are GMT -4. The time now is 06:54 AM.