View Full Version : Dynos and timesheets
- PSR 4849G (G25-550 Clone) Built Motor Pump 93
- 340hp/280tq: '94 forged EFR6758 on E85
- 97 NA8 added electronic boost controller.
- Forged 1.6 Kraken Low mount jrspec GT2871r
- EFR 6258 & built motor
- Stock NA8 VirtualDyno
- Pulsar GTX2867R meets Kraken Low Mount
- EFR 6258 + Kraken vs Stock VVT motor
- GTX2860R : Kraken Low Mount -VS- FM DIY Kit
- Efr 6258 e85 virtual dyno
- NB1 Virtual Dyno before Drag Strip
- Kraken EFR 6758 with some FPR testing
- Stock NB1 + exhaust
- Rotrex'd NB1
- NB2 With FM Kit + Ms3PNP, before and after E85
- Gtx2860 gen2-- 373whp/351tq-- 22psi
- Show us your 60-125mph or 100-200kph times!
- Going slow at the drag strip with my 1.6
- NA w/VVT 2560 kraken
- Trump's Dyno Sheet
- GT2560r vs GTX2860 genII
- Possibly the Quickest BP Powered Miata Pass?
- NA6 goes NA8-T (2860, rods only, 1000cc, kraken)
- NB2 VICS + MS3
- MSP turbo (GT2554R) / 1.8 VVT
- Stock internal nb2 1/8th mile.
- NB miata, BP4W Efr 6758 @24psi
- GT2871R 48 Trim and e85 dyno
- Miata bp4w efr 6758 Virtual Dyno
- GT2560r NB2 Virtual Dyno
- Bp4w w/VVT, evoX/Msm bastard, custom manifold, not enough injector
- 99 w/ Garrett GT2554R
- 326whp/341ft-lbs EFR 6258 BP4W
- 2.4L Ecotec LE5 N/A
- 1.8 NB and GT2560r
- Made 309whp and 295tq with a 16g
- Post your 1/8th and 1/4 mile timeslips here please
- 127mph 1/4 mile
- 2.4 ecotec turbo
- Wasting my time with a 1600 turbo.
- 2002 FMII MS3PRO GT2560r
- NB built BP4W, GT2560R, 16-17psi
- GT2560r + Stock 1.8 first dyno
- Trackspeed EFR6258 w/CNC Head
- Manifold Comparison VCTS, Flat Top, Skunk 2
- Another boring built motor 2871
- MKTurbo on stock 1.6L @14psi
- VVT engine swap (lots of mods)
- TD04HL-15G @ 16psi
- TSE 6258 @ 7psi
- Gt2560r 300whp Flyin Miata / flexfuel megasquirt
- EFR 6758 294hp/257tq
- Previously churbo, now gtx2863r
- T3Super60 Dyno
- Slow ass
- 1994 MKTurbo 1/8th Mile
- MKTurbo kit on a grenade motor
- My Mkturbo results
- NB2 EFR 6258 Kraken mani/dp
- 310hp Rotrex c30-74 with e85
- 1.8 build GTX2867 Dyno
- 1.6 + vag turbo dyno results
- GTX2860 @ 20psi Dyno
- EUDM NB2 VVT Flattop vs AE101 ITBs
- EFR6258, 1884cc BP6D, 415whp/343wtq
- 95 Miata, TS EFR6258 etc etc
- Trackspeed Stage 2 VVT shortblock, EFR6758, E85, 452whp/427wtq@26psi. I'm scared.
- NB2 vvt vics AVO gt2560 17psi - 264hp 253tq
- EFR 6758 + VVT + 19psi = 316BHP/405Nm
- pdexta's vd log
- Exocet w/ 1999 1.8L FMII GT2560 and some colored lines
- MSM with Flex Fuel Setup
- Trackspeed Stage 2 VVT shortblock, EFR6758, CA91, 297whp/272wtq@17.5psi
- Trackspeed Stage 2 VVT shortblock, CNC head, EFR6258, E85, 300whp/264wtq@16psi
- 1.8 with FM hot side and .86 GT2860R
- Exocet fun with gt2871
- 0-60 Times
- 1.6 JRSC/FMIC/MS3x Virtual Dyno. Oh....
- 1.6L dyno paper
- 1994, GT2554r, Low Numbers?
- 1995 Miata 1.8 BONE STOCK
- Another EFR6758 Dyno
- Virtual Dyno '90 NA with '99 BP4W
- Virtual Dyno 94 MK Turbo
- Virtual Dyno - '00 MK Turbo
- Virtual Dyno - 2009 NC2, Fab9 EFR, 16psi, 328hp / 297tq
- Virtual Dyno: 95 w/ t3 50 trim and EWG
- 1.9 with GT2871R, 14psi, Link G4+
- Virtual Dyno results 02 JDM VVT with bolt on's
- TD04L-13T@21psi peak, someone please verify if im using virtualdyno correct
- 99 1.8 - TD04 MS2
- 05 vvt, sr20 T25, FM everything, 2.5"
- Built 1.8L NA8 with FMII & GT2560
- 95 Super 60
- Ecotec swap with new exhaust, new dyno and drag!
- 1995 Miata, stock 99 engine, 5spd, 4:10: 14.775 @ 91.88mph
- Gt2871r pump gas, skinny tires dragstrip fun
- 2000 SE with Ecotec 2.4 LE5 swap.
- 1.6L w/ GT2560R + E85
- Built 1.9L with GT2560
- Drag racing tonight - two questions
- GT2554R Record??? leads to a run of the mill EFR build
- MSM with Big Enchilada Dyno
- 11.48 at 122 from the fast son of a..........hill
- Doing some drag
- 400hp Built 1.6L GTX2867 E85
- 1.8 AVO kit MSpnp
- GTX2863R
- GTX2867R, FM log mani, 1.8, 8.4cr
- New personal best 1/8th mile
- 1.8, C30-74 Rotrex, 9psi, 235WHP/190WTQ (E85)
- Begi Churbo vs. GT2554R
- 321.24 whp / 305.02 wtq @ 19.5psi
- Built 1.6, gt2871r, e85-305whp/278tq
- Vodka guzzling churbo, result.
- 1.8, gt2554r, 420cc, ms3, 12.5psi
- 1.6 Wannabe MK T3 Auto VirtualDyno *cam gear + 5spd cam update
- 1.8, GT2554R, 420CC, 9psi, 220whp (Mustang Dyno)
- TD04l 1884cc virtualdyno
- It lives!
- MP62 1/4 mile run
- 236whp, ~14.5psi / Begi Churbo, Stock 1.6L
- 99 T28 Churbo 16psi Dyno Run
- Stock 1.6 owns 1.8s graph inside
- 04 MSM with FM2 Dyno Results
- 94 1.8 with sr20 turbo
- My Turbo 10AE's dyno tune session
- 350HP 1.6??? Ebay turbos, Corn oil and drifting inside
- anyone know what the msm stock turbo record is?
- NA8 BEGi S4 2860r @ 14psi (245whp/217tq)
- Built MSM w/6258
- Blouch/FM turbo "old Big Enchilada" MSM quarter mile
- NB1 with GT2860R at 12.5 psi.
- MSM stock motor/turbo setup/gen 1 pnp/rx8 440s/big front mount, 2.5 inch DP
- 04 MSM stk turbo
- 99 with M45 delete add MS3 and a 6 speed :)
- 99 eft turbo DIY setup
- F20C timeslip
- 1.6 TD04L
- 1.8 w/ VVT Precision 4828 10lb'ish
- M45 results with rudimentary engine management and E85
- 1.8 BP with and without vics comparison
- N/A NA8 Bolt-ons+exhintake+MS2
- Most powerful 1.6 & 1.8 turbo miata?
- 4G63 rat rod dyno=800.3hp 556tq
- 1.6 pull video
- Slowest Turbo Miata ever makes a pull
- 1.6 BEGI/FM, GT2560 (234 ft-lb / 224 WHP @ 14 psi)
- NB 1.8 Intercooled shanghai
- Soviet era car, space age turbo, rocket fuel
- My dyno woes
- headed to the strip tonight
- 1.6 Artech SR20 200hp 1/4 mile
- 1.6 with ebay something turbo
- :( ...(aka non-descriptively-titled dyno fail thread)
- 1.6/disco potato/mustang dyno
- T2554 @ 12psi on E85
- GT2560 against GT2860RS
- 12.30@118.39mph w/ old 96 motor with SSAutochrome manifold and eBay turbo
- Timeslips 99 n/a intake exhaust seat bar
- Timeslips 99 n/a intake exhaust seat bar
- Turbo Miata 1/8th mile
- '96 1.8, China 2870, FM log mani, 9psi
- My Addiction on the dyno
- Got torque? Post your Tow rig's dyno here
- 1.6 upgraded gReddy dyno
- Na brg - m45 180 whp
- Dyno'd- now what? More boost!
- Dyno'd now what?
- 1.6 Begi GT2560 E85 12psi 206whp/261nm
- Soviet Era Car, Space Age Turbo. EFR 6758
- 1/4 mile - stock motor, 223k miles, ebay turbo and ssautochrome - 12.54@117.8mph
- The ITB FE3 Dyno
- 1.6L @7psi, 215 hp & 203 tq
- Dyno Fail
- Artech 1.6 at 10 psi
- Shanghai-s at 9.75psi
- 10psi 2871 Tial vband 0.86
- 330rwhp/258rwtq -- 1.8 motor w/1.6 Lysholm SC (upped boost)
- BEGI-S GT2554r with intercooler 10PSI(bad oil seals?)
- T3 60 trim, dyno 2 at 22 psi
- Took her to the strip.
- Conservative 230 hp GT2560 12 psi on stock motor
- 97 with WRX TD04
- Greddy 9 PSI, No IC, WI -- 149RWHP 135RWTQ -- Mustang Dyno
- GT2560 dyno
- 1/8th mile drag
- FM2 2.5 vs 3.0 exhaust
- photos and dyno results
- 2002 NBB BEGi S4 GT2860RS Adaptronic 310hp 290tq DYNO
- New Numbers - GT2871 @ 19psi
- 92 MX-5, stock 1.6 GT2860RS @17-18 PSI
- NA swap 1999 NB8, Garett 2560 at 11psi, 3" exhaust, water injection, FM Manifold
- 99 Miata, 8psi, Garrett GT2554R. 223whp, 247wtq
- 1\8 mile
- 11.870 / 114.64 mph on Emanage Ultimate
- Tuning The Escort GT-T @ HPLogic
- GT2560 - 261 ft-lbs, 272 hp
- 1999 Forged Bottom FM2 w/ MS1
- GT3071, Stock 1.8, BEGI Log Mani, 9psi.
- Built 1.6L C30-94 Rotrex 14.8PSI peak
- Dynojet dyno vs Data Log Lab
- Jeff_man mp62 10.8psi stock 99 motor retuned
- 12.5 @ 113.5 mph
- 1999 Miata - GT2560R @ 15-16psi
- So I hit the rolling road today ...
- N/A 2000 1.8 Swap with minor bolt ons
- gt2871 dyno
- 12.69 @ 111.5 mph
- Built High Comp N/A 1.8L Track car
- Techsalvager's cheapness dyno
- Did some drag tonight
- Back to the dyno in my "de-Greddified" 1.6L DIY setup
- Back to the dyno: 1.6 15g @ 10psi
- 1.8 Hybrid T28 @ 15psi
- A bit of a start, 1.8 gt2554
- Faeflora's Dyno results GT3071R @ 20psi
- Comparison Chinacharger 2871 vs Garrett 2554R vs Garrett 2560R
- Godspeed GT28 Chinacharger Turbo & 1990 Miata with stock 1.8
- Chinacharger GT2870 vs Garrett GT2554 with Dynochart
- 1.6L - T3 ChinaTarder on MS3X 236hp/235tq
- 1.6 gt2871, artech 3" dyno
- Chinacharger 2560 @ 11psi on a 1999
- 1.6 built,china 2871, e85 - 324rwhp
- ATTS Drag -12.755@109mph
- First time at a dragstrip this year
- My first dyno
- What you've been waiting for results inside!
- Tiny turbo Dyno
- China 2871 dyno run built 1.8l 280hp 250tq 20psi
- Went to the drag strip for the first time, broke into the 12's
- NB 2560 dyno @ 11psi
- Begi S kit fully warmed up.
- How does this NA spark table look?
- mp62 10.8psi stock 99 motor
- mp62 9psi stock motor
- 1.6 GReddy at 11psi - 224hp/183tq
- stock 1.6, 14b turbo, 230whp 14psi
- Euro 1,6 99-00 @11PSI - shouldn't this be more?
- Trackspeed Engineering/ABUSRDflow - GT2871R, E85, 1.9L 8.6:1 - 351whp/294tq/17psi
- Drag Strip Newb
- Eesh, this is bad.
- FM2, 1.8 w/ NB head
- Braineack is at maple gove dragway...
- I'm going in, cover me... (Built 1.8L GT2871)
- 1.8 GT2554 at 12.5 psi
- Maple Grove Dragway 6/11/10 results
- 18psi 336whp 20psi 349whp
- 97 1.8 with Godspeed GT28 Turbo @ 11.5psi
- GReddy at 12PSI trailing to 9.