When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
According to the Megasquirt manual VICS is in the programable on/off out puts Injector I out. I was looking at it which drop down should be switched on or off in this screen. Attached is how I have it currently set.
Those are the correct values for VICS, if you get the car on a dyno, you can verify by setting the rpm to 1000 and 10000, then set the rpm to where those two runs intersect, which is usually right around 5500. Do a 3rd run to verify it now follows the top of both test runs.
Those are the correct values for VICS, if you get the car on a dyno, you can verify by setting the rpm to 1000 and 10000, then set the rpm to where those two runs intersect, which is usually right around 5500. Do a 3rd run to verify it now follows the top of both test runs.
VICS
0
