I was running adatronic plug and play for my 1.6 miata. I am currently doing a 1.8 swap. Since there is no more distributor in the 1.8 engine, how do I connect to the cas now? What do I do with this plug? I am guessing it's the cam angle sensor?

 

I ought to mention, i found this while searching through the forum.

-Hook the crank sensor signal wire into the OEM harness' Crank input (2E, White wire)
-Hook the cam sensor signal wire (from the valve cover sensor) into the OEM harness' Cam input (2G, Yellow/Blue wire)

Does anyone have the directions to the plug side? That is, how to tap the wires from the plug rather than from the ecu?

 

The old engine didn't have a distributor either. You can cheat and fit the NA CAS to the NB engine, but the triggering won't be as accurate.

Cheers

 

Oops my bad, not distributor. Anyway, I wanted to replace the old NA cas for the newer nb cam and crank position sensor for the same reason.