Can someone help me with wiring the MSM abs pump into an NA chassis w/o abs?

I have all the parts, but I just need to know how to wire it up. The air bags have been deleted in the car so I was planning on using those "open" fuses for the 30a and 20a power source. I just don't know which wires are which, so any help would be amazing.

I'd also like to wire in an on/off switch for it too. I'm a nut/bolt guy and a total when wiring gets mixed into a job.

I have been reading lots of thread but none of which actually spell it all out.

Thanks guys.

 

You are on the right track using the spare heavy fuses in the engine compartment box. See if this scan helps. I don't have a digital version of the page besides this. IIRC, you need two power leads (heavy 30A and lighter 20A). Put your switch (with relay?) on the 20A side. You'll need a ground or two, a brake switch and a pair of wires to each corner for the wheel sensors. You won't need the data link and if you want to hook up the dash light, go for it.

*edit - it looks like three +12v leads.

 

I did it in mine (03 ABS into 99 chassis), build thread here:

https://www.miataturbo.net/build-thr...into-nb-73579/

--Ian

 

Thx guys!