Itb Turbo 1.65L :)
#1
Itb Turbo 1.65L :)
Hey guys! just wanted to share my car on here.
Im still building it so I have no hp numbers/ track times yet. The plan is to have it up in running the spring of 2015.
Its a 1992, 1.6L with a whole long line of mods. im sure ill write up a detailed list. The car is being built for many purposes. highway runs/ occasional time attack/ drag racing and taking to car shows. Ive owned the car since 12/15/10. Hope yall enjoy!
and here current day...
Im still building it so I have no hp numbers/ track times yet. The plan is to have it up in running the spring of 2015.
Its a 1992, 1.6L with a whole long line of mods. im sure ill write up a detailed list. The car is being built for many purposes. highway runs/ occasional time attack/ drag racing and taking to car shows. Ive owned the car since 12/15/10. Hope yall enjoy!
and here current day...
#5
too easy. I have all the internals but the motor hasn't been machined yet..
Engine
Supertech 1mm oversize SS valves
Supertech solid lifters
Supertech dual valve spring
Supertech valve seals
Supertech titanium retainers
Supertech seats
Delta 272 cams
Jenvey IRTBS w/ custom plenem box
Supertech 8:8:1 Compression 0.040 overbore pistons
Manley rods
ATI crank pulley
BE billet oil pump (2 shims)
Fuel/spark:
Deatschwerks 320lph pump
Deatschwerks 900cc injectors
AEM FPR
Jenvey fuel rail
AN -6 feed and return
Fab9 COPs
Turbo kit Custom built by levels performance in Orlando fla
Precision 5858 T3 .63 ar
Custom t3 top mount manifold
Full 3" ss turbo back
custom charge pipes with vibrant vanjen clamps
Tial Q bov
Tial 38mm EWG
Fab9 550hp intercooler
Engine
Supertech 1mm oversize SS valves
Supertech solid lifters
Supertech dual valve spring
Supertech valve seals
Supertech titanium retainers
Supertech seats
Delta 272 cams
Jenvey IRTBS w/ custom plenem box
Supertech 8:8:1 Compression 0.040 overbore pistons
Manley rods
ATI crank pulley
BE billet oil pump (2 shims)
Fuel/spark:
Deatschwerks 320lph pump
Deatschwerks 900cc injectors
AEM FPR
Jenvey fuel rail
AN -6 feed and return
Fab9 COPs
Turbo kit Custom built by levels performance in Orlando fla
Precision 5858 T3 .63 ar
Custom t3 top mount manifold
Full 3" ss turbo back
custom charge pipes with vibrant vanjen clamps
Tial Q bov
Tial 38mm EWG
Fab9 550hp intercooler
Last edited by Mr. Mattman; 07-14-2014 at 11:07 PM.
#8
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,962
Total Cats: 1,012
I thought you were totally handicapped until I saw this:
Props for it and what you're doing. 1.6 is kinda fail but whatever it's your thing and by the looks of it, you're doing it well.
Props for it and what you're doing. 1.6 is kinda fail but whatever it's your thing and by the looks of it, you're doing it well.
#14
But, Being that you worked with what you had, you definitely did it properly.
Just.... considering the fact that you can get a 1.8 for sub-$500, and all the parts you have would have cost the same across the board for the 1.8, For the little bit extra, and a few extra hours (literally a few) you could have had a bit more room to play, and an "optimal" setup.
( NOT a diss in any way, just explaining the thought process of 1.8>1.6 in a build as extreme as yours)
But, you did what you did the right way, and made the best out of what you had, so for that you get lots of props