Johnny C from OG racing.. My build thread. LS1 miata..
#1
Johnny C from OG racing.. My build thread. LS1 miata..
I should start a build thread so i can have a place to post updates.
I built the car in originally 2010 and have been replacing every component twice ever since.
the original build.
I picked up a 1999 with 250kmiles. The guy I boutght it from said it has a blown motor, but I think it was just Miata tick. Ether way a good platform for a v8 build.
.
Trans is a Tremec t-56 for a Camaro and a sfi bell housing.
1997 corvette LS1
the fisrt seat i used was a FX1. i hated this seat. butt would go numb after an hour. it retuned to being a video game chair in 2012
the first dash. all autometer
huge mess. just start tearing everything out.
Got all that useless everything out of there.
Dif parts for the 8.8 are stupid cheap. this lsd was only 120 bucks.
I cheated and went the easy way out with a new harness.
the most tedious job in the world..
seem welding. the glue goes everywhere. i found the best way to get rid of it was with a propane torch. and a wire brush.
more of my fantastic welding.. i'm much better now.
good win 11: bbk. word of warning the porter-fields that come with this are not track ready... i burned them up instantly at autobahn raceway.
i went with stance at first.. you know a fantastic idea. :(
trusty 15x9 6ul
and the r1r's. still my favorite rain tire.
I took a brake from the build to go race my 1.6l, and won these guys. 2 races 2 first place victories, i couldn't be happier with the outcome. thanks to WCMC for putting on the event.
This car had 250,00 miles on it when i got it. and the floor pans look new.
more welding..
cover the welding
textured paint... the trick to painting un even surfaces.
tadaaaaaa!!!
I built the car in originally 2010 and have been replacing every component twice ever since.
the original build.
I picked up a 1999 with 250kmiles. The guy I boutght it from said it has a blown motor, but I think it was just Miata tick. Ether way a good platform for a v8 build.
.
Trans is a Tremec t-56 for a Camaro and a sfi bell housing.
1997 corvette LS1
the fisrt seat i used was a FX1. i hated this seat. butt would go numb after an hour. it retuned to being a video game chair in 2012
the first dash. all autometer
huge mess. just start tearing everything out.
Got all that useless everything out of there.
Dif parts for the 8.8 are stupid cheap. this lsd was only 120 bucks.
I cheated and went the easy way out with a new harness.
the most tedious job in the world..
seem welding. the glue goes everywhere. i found the best way to get rid of it was with a propane torch. and a wire brush.
more of my fantastic welding.. i'm much better now.
good win 11: bbk. word of warning the porter-fields that come with this are not track ready... i burned them up instantly at autobahn raceway.
i went with stance at first.. you know a fantastic idea. :(
trusty 15x9 6ul
and the r1r's. still my favorite rain tire.
I took a brake from the build to go race my 1.6l, and won these guys. 2 races 2 first place victories, i couldn't be happier with the outcome. thanks to WCMC for putting on the event.
This car had 250,00 miles on it when i got it. and the floor pans look new.
more welding..
cover the welding
textured paint... the trick to painting un even surfaces.
tadaaaaaa!!!
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#2
While i waited for the pant to dry, I swapped out the K member. New k member is on the right. It's 10 lbs lighter then the old one, on the left.
and done
new spec miata 53mm radddddd!
.
300% larger for 300% mor powaaaa!!!
started wiring up the dash
I busted out my fancy camera, and tried my best to be artistic.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#3
oh man that's a lot of green.
figuring out the wires.
slap some body panels on there. everything fits.
that is a lot more green...
running exhaust.
first fire up
on the ground for the first time
figuring out the wires.
slap some body panels on there. everything fits.
that is a lot more green...
running exhaust.
on the ground for the first time
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#4
she's fat.
i took it to car shows
and did track days
.
we took the car to holley's LS fest. and i let a buddy do the drift demo. while i did the Autocross.
One thing lead to another... and he crashed it.
the alighnment was fubared. but i still had fun.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#8
it's a crappy ebay bumper. i might be up for grid life.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#10
wasn't that event 4 years ago? (inside joke)
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#11
some minor updates.
to fix the crash damage, we had to cut a little material off.
i took the front off of a 2002 miata and welded it on to this one.
came out looking alright.. good enough for a race car.
the bumper has seen better days..
i replaced these gauges with...
the holley touch screen.
you can play solitaire on the touch screen.
to fix the crash damage, we had to cut a little material off.
i took the front off of a 2002 miata and welded it on to this one.
came out looking alright.. good enough for a race car.
the bumper has seen better days..
i replaced these gauges with...
the holley touch screen.
you can play solitaire on the touch screen.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#13
over all i was unhappy with the performance. out of the box the rear coils had >1/2" of suspension travel before i got coil bind. i upgraded to swift springs, then i had >1" of travel until the shock hit the bump stops. at my power level when i hit the power band the rear would squat, the suspension would bottom out, and i would lose all grip. very nerve racking @ 5000rpm in 4th gear (120mph) I also didn't like the damping adjustment. one click it would go from under danpin, to over danpined.
I now have the AFCO coils. They have fixed all the bottoming out issues i used to have with the stance. although i am not 100% happy with the danping they provide. they will be sent off for testing and a higher valving this year.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#14
i hit a deer. the day after fixing the damage from the crash.
yes that's poop on the door
fixing things...
adding stiffness.... on a side note. i made my own door bars. they made the covers on my seats last for years!! i would rub the bars vs sitting on the edge of the seats.
Went to CMP and blew a drive shaft on the first 3 laps. i did put down a 1:44
I got a new bumper. decided that the neighborhood would kill me if i painted stuff int he garage.
wrapped the whole car.
cat approved
then the fans broke.. the sway bar was rubbing the fan shroud. locked the fan up, and it failed. i got a replacement at autozone for $50. these stupid things are cheap, and work fantastic!! i was so happy with it i went back and bought another one.
catching up to modern day.. 2013 ls fest
drag racing can terrify me. my 60 ft times show it.
A little out of place...
I won the auto cross and made it on to TV
Victory burnout.
Started working at OG Racing
swapped in a NA6 dash. saved quite a few lbs
got a new formula harness... this thing still rocks
The corbau was retired to video game chair duties. i picked up a Pro-adv seat. i still love this thing.
more axle problems.... after this i upgraded to the 800 hp drive shaft shop axles.
doing demos @ formula D
scale time
nose heavy my ***!!!
Went and raced Ultimate Street Car Asoch @ Daytona
and hit a cone at 110mph..
went to home depot racing...
and stitched it back together
new bumper time..
yes that's poop on the door
fixing things...
adding stiffness.... on a side note. i made my own door bars. they made the covers on my seats last for years!! i would rub the bars vs sitting on the edge of the seats.
Went to CMP and blew a drive shaft on the first 3 laps. i did put down a 1:44
I got a new bumper. decided that the neighborhood would kill me if i painted stuff int he garage.
wrapped the whole car.
cat approved
then the fans broke.. the sway bar was rubbing the fan shroud. locked the fan up, and it failed. i got a replacement at autozone for $50. these stupid things are cheap, and work fantastic!! i was so happy with it i went back and bought another one.
catching up to modern day.. 2013 ls fest
drag racing can terrify me. my 60 ft times show it.
A little out of place...
I won the auto cross and made it on to TV
Victory burnout.
Started working at OG Racing
swapped in a NA6 dash. saved quite a few lbs
got a new formula harness... this thing still rocks
The corbau was retired to video game chair duties. i picked up a Pro-adv seat. i still love this thing.
more axle problems.... after this i upgraded to the 800 hp drive shaft shop axles.
doing demos @ formula D
scale time
nose heavy my ***!!!
Went and raced Ultimate Street Car Asoch @ Daytona
and hit a cone at 110mph..
went to home depot racing...
and stitched it back together
new bumper time..
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#16
Got more updates. NASA SE June Jam @Road Atlanta - Took home the nasa TTU (unlimited class) win on Sunday. Saturday i came in 2nd. i was running the PFC 01 compound on 11.75" pfc rotors, rear where sport good win racing "Sport rotors" with PFC 06 compound.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#17
I got this crazy idea.
This is how the big boys mount these things.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#18
Built the sub frame over the weekend. I had to gut about 1.5" off my bumper to get it to clear. some slight trimming on the splitter will be needed. I don't Think the weight penalty will be too bad. So far it's sitting at only 15 lbs.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#19
These bad boys came in the mail..
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#20
just some quick updates. I'm planning on pushing the engine back 2.5", build a roll cage, and upgrade to V8 roadsters 11.75" brakes on all 4 corners. tear down on the car has started.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com