Spent some time over in my thread compiling stuff. Feel free to add on. This order came out to around $100 on mazdacomp

Dipstick O-ring: 9954-10-0907
Front Oil pan Seal: B541-10-427
Rear Oil pan Seal: B541-10-428
Front Main Seal: B3C7-10-602A (already have)
Rear Main Seal: BP05-11-312
Oil Pump pickup gasket: B6BF-14-248

Valve cover gasket: BP6D-10-235A
Intake mani to head: BP4W-13-111
Intake mani upper to lower: BP5A-13-135

VVT cover gasket thing under the plate with 3 screws: ZL09-10-607
3 VVT screws: 9YAF-00-501
Intake cam seal: ZL09-10-602 (Included in VVT rebuild)
Exhaust cam seal: FS05-10-602A

 

E301-15-287 mixing manifold O-ring. I think the MM to water pump gasket comes with a new WP. The MM O-ring sometimes needs to get replaced on its own tho.

 

8DN5-10-271 GASKET SET,ENGINE 1.00 $222.20
Easy mode.

 

$220. Vs $96.

 

in for info!

 

Metal Gasket under VVT valve body and under 3-bolt plate also come with the rebuild kit.

 

The gasket under the 3 bolt plate isn't shown in the kit picture. I'll see what happens when it shows up.

 

It's there

 

EGR gaskets on intake manifold

JE27-20-305A
JE06-20-306

Woodruff Key:

B3C7-11-317

PCV grommet:

E301-13-338A

 

Thermostat Water Pipe Neck O Ring 90 thru 05

B61P-15-106A

 

The Miata Roadster VVT kit doesn't come with two copper crush washers for oil line to block: 99562-1000

 

did we ever confirm that the 3-hole VVT cam bolt gasket thingy comes with the miataroadster kit?

 

This seal came in the VVT rebuild kit

 

Right on brother

 

i wish this list was here when i bought all that stuff.

 

I bought almost every seal new in late 2015 for a build I am doing. This is what I have:

• Dipstick O-ring: 9954-10-0906
• Water pump gasket: B6BF-15-116
• Water pump inlet gasket: B366-15-165
• Intake Manifold Gasket: BP4W-13-111
• Front oil pan gasket: B541-10-427
• Rear oil pan gasket: B541-10-428
• Head gasket: BP26-10-271 (This gasket is the one for the earlier 1.8 blocks, not the NB2 blocks still works though)
• Valve cover gasket: BP6D-10-235A
• Exhaust Manifold Gasket: BPD3-13-460
• Oil pickup tube/strainer gasket: B6BF-14-248
• PCV valve grommet: E301-13-338A
• Woodruff Key: B3C7-11-317
• Rear main crank seal: BP05-11-312
• Front crank seal: B3C7-10-602A
• Exhaust Cam Oil seal: FS05-10-602A (I think)
• Throttle body gasket: B6BF-13-655
• Upper banjo bolt crush washer for VVT line on block (VVT): ZL09-10-333 (need 2 of these)
• Lower timing cover gasket: B660-10-522
• Middle timing cover gasket: B660-10-673
• Oil control case adapter O ring (VVT): BP6D-10-673 (need 2 of these)
• Freeze plugs (1-1/4" O.D.): 9930-63-000 (I think you need 7 of these)
• Camshaft position sensor: ZJ10-18-221
• Oil pump O ring: FE1H-14-122B
• Intake cam oil seal: ZL09-10-607
• Front VVT cover 3 bolt gasket (VVT): ZL09-10-607
• Timing cover plate U-shaped rubber seal: B61P-10-544
• Tension pulley: GMB455-2050 (Not mazda part #)
• Idler pulley: GMB445-2060 (Not mazda part#)
• upper horizontal water pump seal: B660-10-543B
• STD thrust washer/bearing: ZJY1-10-SJ0
• Oil pipe o ring (VVT): 9954-10-2206 (need 1 of these)
• Freeze plugs ( 1-3/8" O.D.): 9930-63-500 (I think you need 2 of these)
• JDM/EUDM Squaretop Intake manifold plenum: BP6Z-13-135
• VVT O ring (VVT): ZL09-10-674 (need 2 of these)
• Lower Banjo bolt crush washer for VVT line on block (VVT): 9956-21-000 (need 2 of these)
• IAC valve gasket: BP2Y-13-W89
• Cap at the back of cylinder head Exhaust cam side: KLG4-12-603
• VVT body gasket (VVT): BP6D-10-663
• VVT oil filter (VVT): ZL09-14-3X2
• VVT torx screws (VVT): 9YAF-00-501 (need 3 of these)
• Tensioner spring: B660-12-711C
• Competition Engine mounts: NAY1-39-040 (need 2 of these)
• Oil galley plug: 0221-10-327 (not sure if 1 or 2 are needed)

 

I'm pretty sure the entire gasket kit is way cheaper. And includes valve stem seals. I'm not sure what all is included though.

 

Yeah you're probably right, but I couldn't find anywhere online where it said what parts were included in the kit. I also wanted a few different parts like the earlier style 1.8 head gasket instead of the newer one so I pieced it out myself. Took me a while to collect this info. Hopefully it's helpful to someone else.

 

if I google mazdacomp all I get is a page that won't load and hasn't loaded since I first saw the thread. Any link to a good source for that gasket kit is greatly appreciated since the Icelandic mazda dealership wants a stupid amount of money for it.

 

Priority Mazda is where I go for all my OEM parts. I have been buying parts from Tommy for over 10 years now and he has always been great.