Newest Hydra Firmware
Thread Starter
Junior Member
Joined: Jan 2014
Posts: 186
Total Cats: 18
From: Green Cove Springs, Florida
Jeremy Ferber ( Flyin' Miata ) recently sent out an e-mail with a Hydra firmware update attached ( R88 ). Although the e-mail mentioned that the elusive "low-load-misfire" had still not been fixed, it seems to have done so for my car. While the misfire seemed to be a random and minor occurrence, it is an annoying thing on an expensive ECU that otherwise seems to work very well when dialed in.
My car car is running SO WELL that I considered not even installing the update for fear of screwing up a good thing. Not to worry, the upgrade was easily installed and has seemed *so far* to have eliminated the misfire event. if you haven't installed the update, you might want to consider it.
Paul
My car car is running SO WELL that I considered not even installing the update for fear of screwing up a good thing. Not to worry, the upgrade was easily installed and has seemed *so far* to have eliminated the misfire event. if you haven't installed the update, you might want to consider it.
Paul
Agreed, I installed R88 in a customer's '99 over the weekend and it cured a slight misfire under boost. Another customer reported to me he installed R88 in his MSM and it cured some misfires under boost as well. I'll be installing it in my personal car, 2002 with VVT as soon as I start driving it again. I do not have any misfires, but R88 appears to be a solid upgrade to previous versions.




