Supercharger Discussion For all you misguided souls.

94 Miata m45 won't idle

Thread Tools
 
Search this Thread
 
Old 12-23-2015, 09:34 PM
  #1  
Newb
Thread Starter
 
Crumley6969's Avatar
 
Join Date: Dec 2015
Posts: 2
Total Cats: 0
Default 94 Miata m45 won't idle

I have a 94 Miata m45 running on 10 lbs, I just installed an intercooler and now it won't idle but runs great when on the gas, had no problems before the intercooler
Crumley6969 is offline  
Old 12-23-2015, 09:44 PM
  #2  
Junior Member
iTrader: (1)
 
douginjenison's Avatar
 
Join Date: Oct 2013
Location: Grand Rapids, MI
Posts: 123
Total Cats: 16
Default

What kind of fuel management are you using
douginjenison is offline  
Old 12-23-2015, 09:47 PM
  #3  
Newb
Thread Starter
 
Crumley6969's Avatar
 
Join Date: Dec 2015
Posts: 2
Total Cats: 0
Default

JR powercard
Crumley6969 is offline  
Old 12-23-2015, 10:09 PM
  #4  
Elite Member
iTrader: (17)
 
pdexta's Avatar
 
Join Date: Aug 2007
Location: Knoxville, TN
Posts: 2,949
Total Cats: 182
Default

If nothing else changed, then I would assume the intercooler added some additional restriction along the intake tract. Since it doesn't sound like you have any means to adjust the IAC, I'd adjust the idle screw on the top passenger side of the throttle body to bring idle up a bit (rotate counter-clockwise until it idles where you want).
pdexta is offline  
Old 12-23-2015, 10:51 PM
  #5  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,297
Total Cats: 477
Default

Is it idling higher? Is the engine lean as per your wideband? If so, vacuum leak.
patsmx5 is offline  
Old 12-24-2015, 11:36 AM
  #6  
Junior Member
 
Stockish's Avatar
 
Join Date: Aug 2015
Location: Wisconsin
Posts: 66
Total Cats: -3
Default

I have no experience with powercard. But as far as I know, you still use the maf sensor correct? With that being said, I bet there is a boost leak between the intake manifold and the outlet on the supercharger. Make yourself a boost leak tester
Stockish is offline  
Old 01-16-2016, 11:56 PM
  #7  
Newb
 
annamiata2016's Avatar
 
Join Date: Jan 2016
Posts: 2
Total Cats: 0
Default

. No boost leak, typical symtom with SC. install dual throttle body will eliminate the idling issue.
annamiata2016 is offline  
Old 01-18-2016, 04:16 PM
  #8  
Junior Member
 
The Gleas's Avatar
 
Join Date: Jun 2011
Location: Upstate NY
Posts: 66
Total Cats: 3
Default

Or a megasquirt and decent tuning... I have very little idle issues need some more closed loop tweaking to get there. I had SEVERE idle droop issues with my intercooled MP62 setup on powercards. Mostly being I don't think the stock setup could control the 350cc injectors as well. I got decent idle out of a base tune on the megasquirt and slowly learning the tuning required and it is getting it better.
The Gleas is offline  
Old 01-23-2016, 11:34 AM
  #9  
Newb
 
gatorskier's Avatar
 
Join Date: Dec 2012
Location: North Louisiana
Posts: 6
Total Cats: 0
Default

Definitely need Hydra or Megasquirt with intercooler. Power card wouldn't work for me when I added mine either. Be sure you have no leaks. My 1st new intercooler had a hole in it courtesy of a rivet on the TDR plate. Made a hell of a noise !!
gatorskier is offline  
Old 01-23-2016, 07:13 PM
  #10  
Senior Member
iTrader: (8)
 
cyotani's Avatar
 
Join Date: Jan 2012
Location: Azusa, CA
Posts: 1,407
Total Cats: 116
Default

There is too much volume from the IACV to to the intake ports. My m45 already has idle issues without an intercooler. A full stand alone that would let you tune IACV parameter should help.
cyotani is offline  
Old 01-23-2016, 07:31 PM
  #11  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,297
Total Cats: 477
Default

Originally Posted by annamiata2016
...install dual throttle body will eliminate the idling issue.
I did this on my setup a couple days ago, made a HUGE difference. Highly recommend anyone with a hotside SC setup to do this.
patsmx5 is offline  
Old 01-25-2016, 09:19 AM
  #12  
Junior Member
iTrader: (1)
 
BarbyCar's Avatar
 
Join Date: Apr 2007
Location: Toronto, Canada
Posts: 469
Total Cats: 25
Default

Originally Posted by patsmx5
I did this on my setup a couple days ago, made a HUGE difference. Highly recommend anyone with a hotside SC setup to do this.

^This
BarbyCar is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1993z32
Media
16
01-17-2016 09:23 PM
dale
MSPNP
8
01-04-2016 11:32 AM
emilio700
Wheels and Tires
8
12-24-2015 12:50 AM
Scatt Ass
WTB
2
12-23-2015 06:11 PM
Savington
Miata parts for sale/trade
7
12-22-2015 07:09 PM



Quick Reply: 94 Miata m45 won't idle



All times are GMT -4. The time now is 05:25 PM.