Change to BBK
#1
Change to BBK
I have a BBK that won't work with my wheels. I want to upgrade and am looking to just modify what I have. Haven't found anything about this posted previously so here I am. Current kit has 12" rotors with Wilwood Dynapro 4 piston radial mount calipers. They won't work with my 15 X 8 Konig Flatouts, I think if I go to an 11" rotor I can make it work. Any thoughts on if I can get new rotors and caliper brackets, or am I better off just getting a new kit? I don't see anything on Wilwood's site for different mounting brackets.
#2
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,233
Total Cats: 1,149
What wheels did you have before? Wilwood just makes the calipers, a number of vendors make a 11.75” bracket/rotor kit that work with Wilwoods, can you clarify what you have now?
im not a fan of Wilwood calipers, I would suggest stoptech’s 11” kit, fits nearly all 15” wheels with a much stiff caliper and same pad selection, then you can sell your kit complete.
im not a fan of Wilwood calipers, I would suggest stoptech’s 11” kit, fits nearly all 15” wheels with a much stiff caliper and same pad selection, then you can sell your kit complete.
#3
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,695
Total Cats: 3,019
I tried the Flatouts that Pdexta was selling at MATG and they didn't fit over my V8R 11.75 kit with Dynalites. They would have probably fit over 11.00 judging by how close they were to working.
Goodwin makes an 11in kit using Wilwoods so I would check with them if they sell compatible brackets and then you could get rotors and hats from them as well.
Or switch wheels.
Or sell and replace entire kit rather than having all the expensive 12in hardware go to complete waste in a box somewhere. Nobody wants an incomplete kit.
Goodwin makes an 11in kit using Wilwoods so I would check with them if they sell compatible brackets and then you could get rotors and hats from them as well.
Or switch wheels.
Or sell and replace entire kit rather than having all the expensive 12in hardware go to complete waste in a box somewhere. Nobody wants an incomplete kit.
#4
What wheels did you have before? Wilwood just makes the calipers, a number of vendors make a 11.75” bracket/rotor kit that work with Wilwoods, can you clarify what you have now?
im not a fan of Wilwood calipers, I would suggest stoptech’s 11” kit, fits nearly all 15” wheels with a much stiff caliper and same pad selection, then you can sell your kit complete.
im not a fan of Wilwood calipers, I would suggest stoptech’s 11” kit, fits nearly all 15” wheels with a much stiff caliper and same pad selection, then you can sell your kit complete.
I tried the Flatouts that Pdexta was selling at MATG and they didn't fit over my V8R 11.75 kit with Dynalites. They would have probably fit over 11.00 judging by how close they were to working.
Goodwin makes an 11in kit using Wilwoods so I would check with them if they sell compatible brackets and then you could get rotors and hats from them as well.
Or switch wheels.
Or sell and replace entire kit rather than having all the expensive 12in hardware go to complete waste in a box somewhere. Nobody wants an incomplete kit.
Goodwin makes an 11in kit using Wilwoods so I would check with them if they sell compatible brackets and then you could get rotors and hats from them as well.
Or switch wheels.
Or sell and replace entire kit rather than having all the expensive 12in hardware go to complete waste in a box somewhere. Nobody wants an incomplete kit.
Thread
Thread Starter
Forum
Replies
Last Post
Doppelgänger
Miata parts for sale/trade
5
10-01-2011 12:40 AM