followup - Stewart Development revalved shocks (re: Bernie strikes again)
#23
Well after taking a bunch of measurements I have determined that I can use these shocks as the shaft was shortened enough to provide a usable range, the catch is I need to buy new perches and sleeves as the ones I have now are too short.
I will report back once I have the setup installed and see if the ride is better than the Koni SA I have now.
I will report back once I have the setup installed and see if the ride is better than the Koni SA I have now.
#29
I wanted to go up on spring rates but I was way too afraid to send them back to Bernie after the first debacle I went through. I was referred to Kenny at Shock Repair, Rebuilt Shock Absorbers and Managed Racing Shocks for NASCAR Racing, Automotive, ATV and Motocross provided by Shock Specialist, Suspension Systems LLC, Huntersville, NC by Amelrotts and had him do my revalve. I've had them on my car for a couple months now and they are even better than they were from Bernie in the first place. The rebuild cost was very reasonable and only had a 10 day turnaround time.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM